Bedienungsanleitung Mitsubishi HSHD2000U (Seite 24 von 80) (Englisch)

31038

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Selecting a Channel

Now that you have memorized channels, and added or deleted some, you will want

to be able to select channels. If you have not yet memorized channels using

ALLSET, see page 16. (If you selected digital cable box, you cannot select any

satellite channels.)

Antenna/Cable selections Your VCR can receive

indoor/outdoor antenna VHF/UHF channels 2–69

cable antenna without box cable channels 1–125

cable box only cable box channels 0–99

digital cable box digital cable box channels 0–999

Satellite Receiver selections Your VCR can receive

Mitsubish, Sony, RCA, GE, any channel from 100-999 provided

Toshiba, Panasonic, Hughes, by your satellite service

DISH Network

™

(cable channels 100-125 cannot be selected)

Satellite Receiver selections Your VCR can receive

PRIMESTAR

any channel from 1-999 provided

by your satellite service

(cable channels 100-125 cannot be selected)

If you try to select a channel number that the VCR cannot receive, the VCR will not

change channels.

selecting antenna, cable or digital cable channels sequentially

Press CHANNEL on the remote control or turn the jog dial on the VCR front panel.

This will cycle through the channels in sequential numerical order.

When you select digital cable channels from 100 to 999, holding down the CHAN-

NEL on the remote or turning the jog dial on the front panel quickly will advance the

channels in 10 channel increments.

selecting antenna, cable or digital cable channels directly

Use the number buttons on the remote control. For example, to choose channel

23, press 2-3. If you select digital cable channels, you can select the three digits

channels directly by using the number buttons. For example, to choose digital

cable channel 157, press the 1-5-7.

To select a single digit channel, such as channel 5; press 0-5. You can also press

5, then press ENTER.

selecting satellite channels sequentially

Press CHANNEL on the remote or turn the jog dial on the VCR front panel. When

pressing the up arrow or turning the jog dial to the right, the lowest satellite channel

will follow the highest antenna or cable channel. When pressing the down arrow or

turning the jog dial to the left, the highest satellite channel will follow the lowest

antenna or cable channel. The other satellite channels will follow in numerical

order. Continuously holding down CHANNEL on the remote or turning the jog dial

on the front panel quickly will advance the channels in 10 channel increments.

selecting satellite channels directly

For Mitsubishi, Sony, RCA, GE, Toshiba, Panasonic, Hughes and DISH Network;

press the number buttons on the remote. For example, to go to channel 263, press

2-6-3.

For PRIMESTAR channels, press INPUT until the channel number with the

PRIMESTAR light ( ) appears on the front panel display. Then press the num-

ber buttons on the remote.

For one or two digit channel numbers, press the number buttons, then turn the

SHUTTLE ring to the right. For example, to go to channel 29, press 2-9-ENTER.

Setting Up Your VCR

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi HSHD2000U Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info