Bedienungsanleitung Mitsubishi HSHD2000U (Seite 28 von 80) (Englisch)

31038

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Your new VCR offers a wide variety of recording options that take full advantage of

our advanced electronics. First, you can learn how to record a current broadcast.

Then, in another section of this book called Timer Recording, you can learn how

to program your VCR to record at a later time and day.

Recording a Current Digital Broadcast

Recording a Current Digital Broadcast in D-VHS Format

1 Follow the steps 1 to 4 of Setting Up Your VCR to Playback/Recording the

Digital Broadcast in D-VHS Format on page 12.

2 Select the channel you would like to record on the integrated HDTV or the

IEEE 1394-equipped HDTV receiver, not on the VCR.

3 Load a D-VHS tape with its erasure prevention tab intact into the VCR.

4 Make sure that the D-VHS button on the front panel is lit. If not, press this

button until it lights up.

5 When you are connecting the integrated HDTV or the IEEE 1394-equipped

HDTV receiver which is capable of controlling the VCR:

Operate your TV or receiver to record, to pause recording or to stop recording.

Refer to the TV or receiver owner’s guide for this procedure. During your TV or

receiver is operating the HS-HD2000U, d will be displayed on the front panel

display.

When you are connecting the integrated HDTV or the IEEE 1394-equipped

HDTV receiver which is not capable of controlling the VCR:

Press IEEE 1394 INPUT on the VCR remote control to select the device you

would like to record from. d1 to d5 will appear on the front panel display.

Select the number that corresponds to the device from which you would like to

record. And then press REC on the remote control or on the front panel.

Recording will start. When the VCR reaches the end of the tape, it will automati-

cally rewind to the beginning of the tape and stop.

• You can stop recording at any time by pressing STOP or PAUSE on the remote

or on the front panel.

• To resume recording from STOP, press REC.

• To resume recording from PAUSE, press PAUSE.

You cannot use REC/˙REC LENGTH on the front panel to resume recording

from PAUSE.

IMPORTANT

Refer to your integrated HDTV or IEEE 1394-equipped HDTV receiver

owner’s guide.

The recording mode will be changed automatically depending on the

broadcasting signal.

While the VCR is recording a digital broadcast, please do not change the

channel on the integrated HDTV or the IEEE 1394-equipped HDTV receiver.

If you pause the VCR for more than five minutes, recording will stop

automatically to protect the tape.

If you pause a recording, a mosaic noise, a still or a black picture may

appear when playing where the recording is resumed.

If you attempt to record on a tape that has had its erasure prevention tab

removed, the VCR will eject it. To record over such a tape, simply place a

piece of vinyl tape over the opening.

Recording

REC

2 REC LENGTH

D-VHS

REC

STOP

IEEE 1394

INPUT

PAUSE

Erasure prevention tab

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi HSHD2000U Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info