Bedienungsanleitung Mitsubishi HSHD2000U (Seite 75 von 80) (Englisch)

31038

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Trouble Checks

Try This...

• Try automatic head cleaning.

• Clean the video heads using a dry-type video head cleaning cassette.

Do not use a wet-type head cleaning cassette, as it may damage your

VCR. Excessive use of a cleaning cassette could shorten head life.

Follow the cleaning instructions carefully.

• Have the VCR video heads cleaned by a qualified service technician.

• Check that the remote mode of the VCR and your remote are set

correctly (VCR-A or VCR-B).

• Check to see that the VCR/TV slide switch is set to the correct position.

• Change the batteries.

• Try moving the IR Emitter so that there is a clear line of sight between

the Emitter and the box’s remote sensor.

• Check that the IR Emitter is connected properly.

• Sometimes a cable box needs to be set by the cable company to

receive signals. Contact your cable company.

• In order to protect your tapes and the VCR heads, the Fast

Forwarding/Rewinding Speed will be slower than 500x under the

following conditions:

1 Use of tapes shorter in length than T-120 (for example, T-30, T-60,

T-90).

2 Use of tapes longer in length than T-120 (for example, T-160, T-180,

T-210. Also for DF-300, DF360, DF-420, and DF-480).

3 Activating fast forwarding or rewinding from the middle of the tape.

• Be sure to use the D-VHS tape for D-VHS recording.

• You may not be able to record programs which have copy protect data

to prohibit or restrict recording. If you record such programs, Error CP

will appear on the front panel display.

• Try the followings:

- Pull off the IEEE 1394 cable, and leave it unplugged for few

seconds, and then plug it again.

- Turn the power on/off of the IEEE 1394-equipped device which is

connected to the VCR.

- If it is equipped, press the RESET button on the IEEE 1394-

equipped device which is connected to the VCR.

- Turn off the power of the VCR and the IEEE 1394-equipped device

which is connected to the VCR, and then plug out/in the power cord

of each device.

• When you playback the end of a recording, the point where the

recording mode changes or a broken part of the tape, a mosaic noise,

still or black picture may appear.

• The block noise may appear during speed search of the tape

recorded in D-VHS.

• Clean the video heads using a dry-type video head cleaning cassette.

Do not use a wet-type head cleaning cassette, as it may damage your

VCR. Excessive use of a cleaning cassette could shorten head life.

Follow the cleaning instructions carefully.

• Have the VCR video heads cleaned by a qualified service technician.

• The program recorded with the Search w/ Picture in the Customize

Choices menu is set to OFF may not be searched correctly.

• Check the hook-up.

• When you connect more than one IEEE 1394-equipped devices, turn

the power off when they are not being used because leaving the

unused devices turned on may cause a lack of memory and may

interfere with the correct transmission of signals.

• You cannot send/receive the data of digital video equipment (for

example, digital video camera) or a personal computer because the

format is different from that of the HS-HD2000U.

• Is an integrated HDTV or an IEEE 1394-equipped HDTV receiver

turned on?

Problem

Playback is noisy or “snowy”.

VCR remote does not function.

Your converter box or satellite receiver

does not respond to any signals from the

VCR’s IR Emitter.

The fast forwarding/rewinding speed is

slow.

You cannot playback or record in D-VHS.

A mosaic noise, still or black picture

appears when playback or speed search

the tape recorded in D-VHS.

No picture or sound from the IEEE 1394-

equipped device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi HSHD2000U Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info