Bedienungsanleitung Mitsubishi L75-A81 Laservue (Seite 26 von 100) (Englisch)

475237

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

24 2. TV Connections

In Canada call 1(800) 450-6487 for assistance.

A/V Receiver

Most setups require either a digital audio cable or

analog stereo audio cables. To send audio from TV

channels received on the

ANT

input or devices con-

nected directly to the TV, you must use one of the

connections shown below. Usually, only one of these

connections is required.

The TV makes all audio available in digital and analog

formats:

Analog audio coming into the TV is available as •

output in digital stereo format on the

DIGITAL

AUDIO OUTPUT

jack.

Digital incoming audio is available as analog output •

on the

AVR AUDIO OUTPUT L

and

jacks.

1 2 3 4

HDMI

AVR AUDIO OUTPUT

DIGITAL

AUDIO

OUTPUT

RS-232C

GLASSES

EMITTER

ANT

INPUT 2

INPUT 1

DVI/PC

INPUT

IR-

NetCommand

Output/External

Controller Input

Pb Pr

Y/ VIDEO

OPTICAL

INPUT

COAXIAL

INPUT

COAXIAL

INPUT

DIGITAL

AUDIO

OUTPUT

DIGITAL

AUDIO

OUTPUT

AVR AUDIO OUTPUT

Digital coaxial

cable (for a digital

A/V receiver)

Stereo analog cables

(for an analog A/V receiver)

A/V receiver

back panel

Note:

On rare occasions, an HDMI signal may be •

copy-restricted and cannot be output from

the TV as a digital signal. To hear these copy-

protected signals through the A/V receiver, use

the connection for an analog A/V receiver.

Check the A/V receiver’s Owner’s Guide for •

information concerning use of the digital input

and switching between digital sound and

analog stereo sound from the TV.

A/V Receiver with HDMI Output

Required: One HDMI-to-HDMI cable

Optional: One digital coaxial audio cable or analog

stereo audio cables

This option allows you to view content from devices

connected to an A/V receiver. The A/V receiver can

send audio and video to the TV over a single HDMI

cable.

In addition to the HDMI connection, you can use •

an audio connection from one of the TV’s audio

outputs. The optional audio connection allows you

to hear, through the A/V receiver, devices con-

nected to the TV only, e.g., an antenna on the

ANT

input.

You may be able to use the TV’s remote control (in •

mode) to operate connected CEC-enabled HDMI

devices. See Appendix C, page 73.

L75-A91.• This setup allows you to use NetCom-

mand-controlled audio and video switching over the

HDMI cable. See “Case 3: Automatic Audio and

Video Switching via HDMI” on page 60.

L75-A91.• To use NetCommand to supplement

HDMI control of a CEC-enabled A/V receiver, note

the recommendations under “More About Using an

HDMI Connection,” page 60.

1 2 3 4

HDMI

AVR AUDIO OUTPUT

DIGITAL

AUDIO

OUTPUT

RS-232C

GLASSES

EMITTER

ANT

INPUT 2

INPUT 1

DVI/PC

INPUT

IR-

NetCommand

Output/External

Controller Input

Pb Pr

Y/ VIDEO

HDMI

OUT

A/V receiver

with HDMI

output

Any connec-

tion types

(can be HD or

SD video)

AUDIO

DIGITAL

AUDIO IN

VCR

Cable box

DVD player

DIGITAL

AUDIO

OUTPUT

DIGITAL

AUDIO

OUTPUT

AVR AUDIO OUTPUT

Optional audio

connection

(analog or digital)

HDMI

cable

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi L75-A81 Laservue Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info