475237
31
Zoom out
Zoom in
Vorherige Seite
1/100
Nächste Seite
3. Using TV Features 29
In the U.S. call 1(877) 675-2224 for assistance.
To display 3D gaming or 3D cinema content, your
Mitsubishi LASERVUE
®
TV requires:
A compatible 3D source device•
Either checkerboard or Split HD format •
Active 3D glasses•
The TVs 3D options are in the Adjust > 3D Mode menu
described on page 41.
Initial Setup
Check if your HDMI 3D video source device outputs
1.
a 1080p 60 Hz signal. This information will be
needed later when you assign an input name in the
New Device Found screen.
If your 3D glasses came with an emitter box,
2.
connect the emitter box to the
3D GLASSES
EMITTER
jack. Place the box in front of the TV
where there is a clear path to the glasses.
Note: If your glasses are marked DLP Link, skip this
step; no emitter box is required with DLP Link
technology.
1 2 3 4
HDMI
AVR AUDIO OUTPUT
DIGITAL
AUDIO
OUTPUT
RS-232C
3D
GLASSES
EMITTER
ANT
INPUT 2
INPUT 1
DVI/PC
L
R
L
R
INPUT
IR-
NetCommand
Output/External
Controller Input
Pb Pr
LR
Y/ VIDEO
3D
GLASSES
EMITTER
Power on the TV and the source device.
3.
Connect the source device to the TVs HDMI input.
4.
When the
5.
New Device Found screen displays,
name the input according to the table below. Note
that the TV will process the video signal differently
depending on the name you assign. If your source
device is a Blu-ray disc or game console, the signal
must be 1080p at 60 Hz.
3D Video
Source
3D Video Signal
Assign
Name
Computer
Recommended: 1080p 60 Hz (1920
X 1080). The image will fill the TV
screen. Other 60-Hz computer video
signals compatible with the TV will
display with black bars. See page 17.
PC
Other
To see 3D video, the signal must be
1080p 60 Hz
Any other
name
Press
6.
BACK
to close the New Device Found screen.
Watching 3D Video
Note: Active 3D glasses are required.
Press
1.
ACTIVITY
.
Highlight the icon for the 3D video device and press
2.
ENTER
.
Press
3.
MENU
and select the Adjust > 3D Mode
menu.
Select
4.
On for 3D Mode. The On setting will be
memorized for the current input when you exit this
menu.
Select the source format.
5.
Checkerboard is the standard 3D format for •
DLP TV and is compatible with current PC 3D
gaming.
Top/Bottom may be used by some sources and •
can be identified by the screen being divided
into two images, one above the other.
Select the glasses control type
6.
.
For glasses with an emitter box, select • IR
Emitter.
For glasses marked • DLP Link, select DLP Link.
Press
7.
BACK
to close the menu.
If the image does not appear correct
8.
(e.g., objects
appear to be moving in instead of out),
open the
Adjust > 3D Mode menu and set Glasses L-R to
Reverse.
To Watch Regular (non-3D) Content
The 3D Mode setting is memorized for each input.
When you want to watch non-3D images on the input
selected above, open the Adjust > 3D Mode menu and
set 3D Mode to Off.
3D Video
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mitsubishi L75-A81 Laservue wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info