Bedienungsanleitung Mitsubishi L75-A81 Laservue (Seite 41 von 100) (Englisch)

475237

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

4. TV Menus 39

In the U.S. call 1(877) 675-2224 for assistance.

Speakers The Speakers option displays only if an A/V receiver or headphone connection has been

detected. Detection occurs on the right

AVR AUDIO OUTPUT

jack, the

DIGITAL AUDIO OUT

jack,

and any HDMI jack.

TV Turns on the internal TV speakers.

AV Receiver

Turns off the TV speakers so you hear sound only from a connected A/V receiver.

Adjust the sound volume using the A/V receiver controls.

Note: When you disconnect an analog A/V receiver, be sure to change the

Speakers setting to TV to hear sound from the TV speakers.

Headphones

Turns off the TV speakers so you hear sound only from connected headphones.

See “10. AVR AUDIO OUTPUT,” page 20. Adjust the sound volume using the TV’s

volume controls.

The Headphones option displays only if you selected the name Headphones in

the New Device Found screen for the

AVR AUDIO OUTPUT

jack.

This option is not

available if

DIGITAL AUDIO OUTPUT

is connected.

Bass Controls volume of low-pitched sound from the TV speakers.

Treble Controls volume of high-pitched sound from the TV speakers.

Balance Controls audio balance between the right and left TV speakers

Sound Mode Stereo No special audio effects from the TV speakers

Surround Modifies audio from the TV speakers.

• Formonaural(non-stereo)programs,createsasimulatedstereoeffect.

• Forstereoprograms,createsasimulatedsurround sound effect.

Listen To

Available only

for analog

channels from

the

ANT

input

Stereo The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The

word Stereo is displayed when you tune to a channel broadcasting in stereo.

Mono Reduces background noise. Use when receiving a weak stereo audio signal. All

audio is played as mono with this setting.

SAP

(Second

Audio

Program)

Selects an additional monaural sound track not audible during normal TV viewing.

The SAP signal might be related to the program (such as a sound track in a foreign

language), or it might be unrelated (such as a weather report). If an SAP signal is

broadcast, the letters SAP are displayed when you tune to the channel.

Language Selects the current language for a digital program from the

ANT

input. Each digital program may

include from zero to seven language choices.

Available only for digital channels from the

ANT

input.

Level Sound On, Off Reduces differences in sound volume between programming segments, such as

the difference between regular broadcast programs and commercial segments.

Audio

To make audio adjustments:

From the • Adjust > Audio menu:

Press 1. to highlight an option

Press 2. to adjust.

While watching TV:• Press the

key and then

(AUDIO) in the on-screen menu. Press to select

the audio option you want to change. Press to

change settings.

Adjust, continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi L75-A81 Laservue Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info