Bedienungsanleitung Mitsubishi L75-A81 Laservue (Seite 46 von 100) (Englisch)

475237

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

44 4. TV Menus

In Canada call 1(800) 450-6487 for assistance.

Initial, continued

Channel

(Channel

Manage-

ment)

Ant Air,

Ant Cable

You must perform a channel scan to receive digital channels. Scan searches for broad-

cast channels and adds them to TV memory. To start channel scan

Highlight one of the input selections based on your connection to the1.

ANT input

Air• when connected to an indoor or outdoor antenna.

Cable• when connected to direct cable (no cable box)

Press 2. to highlight SCAN.

Press 3.

ENTER

to start channel memorization.

Scan

Edit After channel scan, Edit lets you add and delete individual channels from memory.

• Press

ENTER

to add or remove checks.

• Press

PAGE DN/UP

to jump to the next or previous page of channel numbers.

• Press to move through all channel numbers, one at a time.

Notes on Scan and channel memorization

• Channelmemorizationmaytakeupto15minutes

to complete.

•

To stop channel memorization before completion,

press

CANCEL

Channels already added are retained

• WhenwatchingTV,press

to move through

memorized channels.

•

To add a digital channel that does not appear in the

Edit menu without repeating channel memorization:

Look up the 1. physical channel number for

the new digital channel. See the website

www.antennaweb.org for help.

Press 2.

ACTIVITY

and select the

ANT

input.

Use the number keys and 3.

CANCEL

key to enter

the physical channel number followed by “-1”

and

ENTER

. For example, for physical channel

36, press

ENTER

The TV will search for a digital channel on the channel

36 frequency. When it finds the channel, it will:

a. Add the channel to memory.

b. Change the channel number to the virtual

channel number sent by the broadcaster.

c. Add to memory any associated sub-

channels.

Rememorize channels if you move the TV to a differ-•

ent geographic area with a different channel line-up.

Adding/Deleting Channels Using the Channel Edit Menu

Channels marked with a check are in memory.•

To add or delete a channel from • memory, highlight the channel number and press

ENTER

To add a single digital channel not in the list, see the notes under • Scan on this page.

Digital channels are listed by virtual channel number with the physical channel number shown in small gray text. •

See below for an explanation of these terms.

Virtual - Channel Number (digital channels only). A channel number sent by a local broadcaster. Usually the

virtual number is associated with the corresponding analog channel number. For example, a broadcaster may

associate digital channel 2-1 with their analog channel 2.

Physical Digital Channel Number. - The channel number officially assigned to the actual broadcast frequency;

shown on screen in gray text.

Energy Energy

Usage

Standard,

Fast Power

Options for power consumption while the TV is powered off.

Standard• keeps the TV’s energy use within ENERGY STAR

guide-

lines while powered off.

Fast Power On• lets the TV power up quickly. The TV uses power

while in the off state in excess of ENERGY STAR guidelines for a

powered-down device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi L75-A81 Laservue Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info