Bedienungsanleitung Mitsubishi LU (Seite 5 von 76) (Englisch)

549864

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

EN-5

Important safeguards (continued)

WARNING:

Unplug immediately if there is something

wrong with your projector.

Do not operate if smoke, strange noise or odor comes

out of your projector. It might cause ﬁ re or electric

shock. In this case, unplug immediately and contact

your dealer.

Never remove the cabinet.

This projector contains high voltage circuitry. An

inadvertent contact may result in an electric shock.

Except as speciﬁ cally explained in the User Manual do

not attempt to service this product by yourself. Please

contact your dealer when you want to ﬁ x, adjust or

inspect the projector.

Do not modify this equipment.

It can lead to ﬁ re or electric shock.

Do not keep using the damaged projector.

If the projector is dropped and the cabinet is

damaged, unplug the projector and contact your

dealer for inspection. It may lead to ﬁ re if you keep

using the damaged projector.

Do not face the projector lens to the sun.

It can lead to ﬁ re.

Use correct voltage.

If you use incorrect voltage, it can lead to ﬁ re.

Do not connect multiple electrical appliances

to a single wall outlet.

It can lead to ﬁ re.

Do not extend the power cord.

It can lead to ﬁ re.

Do not place the projector on uneven surface.

Place the projection on a leveled and stable surface

only. Please do not place equipment on unstable

surfaces.

Do not look into the lens when it is operating.

It may hurt your eyes. Never let children look into the

lens when it is on.

Do not touch the air outlet grille and bottom

plate, which become hot.

Do not touch them or put other equipment in front

of the air outlet grille. The air outlet grille and bottom

plate, when heated, may cause injury or damage to

other equipment. Also, do not set the projector on the

desk which is easily affected by heat.

Do not look into the air outlet grille when

projector is operating.

Heat, dust, etc. may blow out of it and hurt your eyes.

Do not insert your ﬁ ngers in the space

between the lens and the cabinet.

The lens may shift causing injury or damage to the

projector.

Do not block the air inlet and outlet grilles.

If they are blocked, heat may be generated inside the

projector, causing deterioration in the projector quality

and ﬁ re.

Do not use ﬂ ammable solvents (benzene,

thinner, etc.) and ﬂ ammable aerosols near the

projector.

Flammable substances may ignite causing ﬁ re or

breakdown because the temperature inside the

projector rises very high while the lamp is illuminating.

Do not use the projector with condensation on it.

It can lead to breakdown or other failure.

Place of installation

For safety’s sake, refrain from setting the projector

at any place subjected to high temperature and high

humidity. Please maintain an operating temperature,

humidity, and altitude as speciﬁ ed below.

• Operating temperature:

For ﬂ oor installation (projection angle 0°) and ceiling

installation (projection angle 180°):+41°F (+5°C) to

+104°F (+40°C)

For installation at other angles: +41°F (+5°C) to

+95°F (+35°C)

For use in the HIGH ALTITUDE mode (see page

13), the allowable operating temperature is +41°F

(+5°C) to +95°F (+35°C), which allows ﬂ oor

installation or ceiling installation only.

• Operating humidity: between 30% and 90%

• Never put any heat-producing device under the

projector so that the projector does not overheat.

• Do not attach the projector to a place that is

unstable or subjected to vibration.

• Do not install the projector near any equipment that

produces a strong magnetic ﬁ eld. Also refrain from

installing near the projector any cable carrying a

large current.

• Place the projector on a solid, vibration free

surface; otherwise it may fall, causing serious injury

to a child or adult, and serious damage to the

product.

• Do not stand the projector; it may fall, causing

serious injury and damage to the projector.

• Slanting the projector more than ±10° (right and

left) may cause trouble or explosion of the lamp.

• Do not place the projector near air-conditioning

unit, heater, or humidiﬁ er to avoid hot or moist air

to the exhaust and ventilation hole of the projector.

• We don’t recommend using the projector at an

altitude of 2700 meters or higher (When using

the product at an altitude of 2000 to 2700 meters

above the sea level, set the HIGH ALTITUDE MODE

to HIGH ALTITUDE.). Use at an altitude of 2700

meters or higher may affect the projector’s life.

Upon Continuous Operation

Please ensure to power off at least for 1 hour once

every 7 days of continuous use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi LU Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi LU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info