Bedienungsanleitung Mitsubishi LU (Seite 30 von 76) (Englisch)

549864

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

EN-30

7. Adjust the position of the projector to keep an appropriate projection distance with which images are projected in

their speciﬁ ed sizes.

8. Adjust the position of the projector so that the projector and the screen are perpendicular to each other. (See page

11.)

• When the projector cannot be positioned perpendicularly to the screen, adjust the projection angle. (See page

14.)

9. Press the ZOOM/FOCUS button to display the ZOOM/FOCUS menu.

10. Adjust with the  or  button to get an approximate size.

• When the ENTER button is pressed while the ZOOM/FOCUS menu is displayed, the adjustment mode is

switched between FAST and STEP. When FAST is selected, the speed of zoom controlled by the  or 

button becomes fast, and it becomes slow when STEP is selected.

11. Press the LENS SHIFT button. The LENS SHIFT menu appears at the center of the screen.

12. Press the  or  button to adjust the vertical position and  or  button to adjust the horizontal position of the

displayed image.

• When the image is not displayed within the screen, adjust the projection angle. In addition, perform the

keystone adjustment, if necessary. (See page 14.)

Repeat steps 4, 5 and 9 to 12, if necessary.

Important:

• Focus, zoom and lens shift adjustment is possible in the normal picture mode only.

To stop projecting:

13. Press the POWER button.

• A conﬁ rmation message is displayed.

• To cancel the procedure, leave the projector for a while or press any button except the POWER button.

14. Press the POWER button again.

• The lamp goes out and the projector goes into a standby mode. In this standby mode, the LAMP indicator

blinks green.

15. Wait about 2 minutes for the LAMP indicator to be turned off.

• During this period of 2 minutes in the standby mode, the intake fan and exhaust fan rotate to cool the lamp.

• The air outlet fans rotate faster as the temperature around the projector rises.

• Though the fans make loud sounds during cooling, such symptom is not a malfunction.

16. Turn off the main power switch.

• The POWER indicator will go out.

• If the main power switch should be turned off or the power cord should be unplugged accidentally while either

the air inlet fan or the air outlet fans are operating or the lamp is on, allow the projector to cool down for 10

minutes with the power off. To light the lamp again, press the POWER button. If the lamp doesn’t light up

immediately, press the POWER button a few minutes later. If it should still fail to light up, replace the lamp.

• Cover the lens with the lens cap to protect it from dust.

• For safety’s sake, unplug the power cord from the outlet.

• When you repeat turning off the main switch within 30 minutes from the lamp illumination, an error may occur

in the clock function of this product.

Direct Power OFF

You can turn off this projector just by turning off the power switch or unplugging the power cord without pressing the

POWER button.

• Don’t shut down the projector while the LAMP indicator is blinking after the lamp lights up because the lamp’s life

may be shortened.

• Don’t turn the projector back on right after shutting it down because the lamp’s life may be shortened. (Wait about

10 minutes before turning the projector back on.)

• Before shutting down the projector, be sure to close the menu screen. If you shut down the projector without

closing the menu, the setting data of the menu may not be saved.

• If you shut down the projector while controlling the projector using the network function, the application software

such as ProjectorView may fail. The data such as the operating time and temperature display may not be

changed. In such a case, close the browser and then start up again.

Viewing video images (continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi LU Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi LU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info