Bedienungsanleitung Mitsubishi LU (Seite 55 von 76) (Englisch)

549864

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

EN-55

• The image within the outer edges of the red

frame is captured.

• The captured image is displayed in the REAL

mode automatically.

CAPTURE : ENTER + ENTER

CANCEL : MENU

CAPTURE : ENTER X2

CANCEL : MENU

12.Adjust the size of the image to be captured so that

such image stays within the red frame.

• Press the , ,  or  button to move the red

frame.

• You can’t move the red frame outside the

screen.

• Press the MENU button to cancel the

procedure.

CAPTURE : ENTER X2

CANCEL : MENU

13. Press the ENTER button twice.

• Image capture will start.

CAPTURE : ENTER X2

CANCEL : MENU

CAPTURING IMAGE !

• When the image capture completes, the

captured image will be displayed for 1 second.

Important:

• You can’t change the new startup screen back to

the original startup screen. (Even when you select

RESET ALL in the FEATURE menu, the factory

default screen isn’t available any longer.) When you

want to change the startup screen again, capture

another image.

• The captured image will be displayed from the

next startup. If the captured image isn’t displayed,

make sure that the setting of SPLASH SCREEN in

the INSTALLATION 2 menu isn’t OFF. (See page

35.)

• When BACK COLOR in the INSTALLATION 2

menu is set to IMAGE, the captured image will be

displayed while no signal is supplied.

• When no video signal is supplied, the projector

takes some time to display the captured image.

• Some images can’t be captured correctly because

of their signal type.

Advanced features

Changing the image displayed at the

startup

You can display your desired image as the startup

screen (or splash screen). By setting the menu, you

can use such image instead of the background image

that is displayed when no video signal is supplied.

Important:

• You can’t set IMAGE CAPTURE when PASSWORD

FUNCTION in the FEATURE menu has been set to

SPLASH ID SCREEN to enable the password lock.

• You can’t set IMAGE CAPTURE when the

component video signal is inputted.

Setting procedure

(See page 32 for menu setting.)

1. Press the COMPUTER button to select the image

supplied to the COMPUTER/COMPONENT VIDEO

IN terminal.

2. Display your desired image.

3. Display the INSTALLATION 2 menu.

4. Select IMAGE CAPTURE by pressing the  or 

button.

5. Press the ENTER button.

• The setting menu will be displayed.

INSTALLATION 2

CUSTOM IMAGE CAPTURE

SIZE

BACK COLOR

CAPTURE

GRAY

opt.

Set the background color

(Set the background color only when you set the

image size to x1 or x2.)

6. Select BACK COLOR by pressing the  or 

button.

7. Select your desired color for the background

(GRAY, RED, GREEN, BLUE, BLACK, WHITE,

RED50%, GREEN50%, or BLUE50%) by pressing

the

 or  button.

Set the image size

8. Select SIZE by pressing the  or  button.

9. Select x1, x2, or FULL by pressing the

 or 

button.

x1 x2 FULL

Capture the image

10. Select CAPTURE by pressing the  or  button.

11.Press the ENTER button.

• A red frame appears. (The size of the red frame

is 640 x 400 pixels.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi LU Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi LU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info