Bedienungsanleitung Mitsubishi LU (Seite 65 von 76) (Englisch)

549864

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

EN-65

Automatic cleaning ﬁ lter

This projector is equipped with an automatic cleaning

ﬁ lter. The burdensome ﬁ lter cleaning is automatically

carried out.

• When the power of the projector is on, the ﬁ lter is

cleaned after the designated time elapses.

• When the cumulative operation time since the

last cleaning of the automatic cleaning ﬁ lter

exceeds the designated time, the ﬁ lter is cleaned

automatically after you turn off the projector by

pressing the POWER button.

Important:

• When the cumulative operation time has exceeded

the designated time and you run the projector

continuously for 24 hours after turning on the

power, the automatic cleaning ﬁ lter works while the

projector is operating.

Setting the cleaning interval

You can set the cleaning interval of the automatic

cleaning ﬁ lter using the menu.

(See page 32 for menu setting.)

1. Display the INSTALLATION 2 menu.

2. Select FILTER MENU by pressing the  or 

button.

FILTER MENU

ENTER

3. Press the ENTER button.

4. Select CLEANUP PERIOD by pressing the  or 

button.

CLEANUP PERIOD

1 WEEK

5. Select 24H

or 1 WEEK

by pressing the  or 

button.

24H

.............The ﬁ lter is cleaned about every 24

hours.

1 WEEK

.......The ﬁ lter is cleaned about every 168

hours.

6. Press the ENTER button.

• When you select 24H or 1 WEEK , the box

to set the cleaning interval is displayed.

24H

NEXT CLEANUP

24H

CLEAR

DEL

CANCEL

12345678 9

← →

1 WEEK

NEXT CLEANUP

7D 00H

CLEAR

DEL

CANCEL

12345678 9

← →

7. Move the key cursor using the direction buttons to

select the number you want to enter and then press

the ENTER button.

• Maximum interval

24H ........... 24H (about 24 hours)

1 WEEK .... 7D 00H (about 168 hours)

 key: Shifting the position of enter cursor

to the left for each character.

 key: Shifting the position of enter cursor

to the right for each character.

DEL key: Deleting the character in the

position of enter cursor for each

character.

CLEAR key: Deleting all the entered characters.

• You can enter the value by pressing the number

buttons (0 to 9) while holding down the NUM

button on the remote control.

• When the value you entered meets the following

conditions, an error dialog box is displayed at

the screen center for 3 seconds.

∙ The value has been cleared by DEL or CLEAR

and left blank.

∙ The value you entered is out of the setting

range.

24H ......... 25H or over

1 WEEK ... 7D 01H or over

∙ The value of each item is out of the setting

range.

D .................. 8 or over (1 WEEK only)

H .................. 25 or over

8. Select OK to accept the interval you entered and

exit the menu, or select CANCEL to exit the menu

without saving the setting.

• When you select OK or CANCEL, the CLEANUP

PERIOD menu is displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi LU Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi LU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info