Bedienungsanleitung Mitsubishi Outlander Sport - 2014 (Seite 69 von 384) (Englisch)

617119

Zoom out

Zoom in

Vorherige Seite

1/384

Nächste Seite

Electronic immobilizer (Anti-theft starting system)

5-6 Features and controls

N00562200126

You can program new keys to the system if

you have two valid (already registered) keys

and blank immobilizer key (specially cut for

your vehicle at your Mitsubishi Motors

dealer) by doing the following:

1. Insert the first valid key into the ignition

switch and turn the key to the “ON” posi-

tion for 5 seconds.

2. Turn the key to the “OFF” position and

remove the first key.

3. Within 30 seconds of removing the first

key, insert the second valid key into the

ignition and turn it to the “ON” position.

About 10 seconds later, the immobilizer

display will start to blink.

4. When the immobilizer display starts

blinking, turn the second valid key to the

“OFF” position and remove it. Within 30

seconds after doing so, insert a blank

immobilizer key into the ignition switch

and turn it to the “ON” position. Perform

this operation no more than 30 seconds

after the immobilizer display starts blink-

ing. When registration of the ID code is

complete, the immobilizer display will

come on for 3 seconds then go off. If an

error occurs, the immobilizer display will

go off during the procedure.

5. If you wish to register another key, per-

form the process again from step 1.

Customer key programming

(Except for vehicles sold in

Canada)

NOTE

 When the key registration is completed, the

immobilizer display will come on within 30

seconds of turning the ignition switch to the

“ON” position with the blank immobilizer

key (specially cut for your vehicle at your

Mitsubishi Motors dealer).

NOTE

 Perform the operation when the interrupt dis-

play screen is not showing. The interrupt dis-

play screen may prevent you from seeing the

immobilizer display.

 It is not possible to register a key if:

• the immobilizer display goes off during the

procedure

• the immobilizer display does not come on

within 30 seconds after step 4.

 The procedure will be terminated automati-

cally if:

• a period of 30 seconds or longer elapses

from the moment when the first key is

turned to the “OFF” position to the moment

when the second key is turned to the “ON”

position

• a period of 30 seconds or longer elapses

from the moment when the second key is

turned to the “OFF” position to the moment

when the blank immobilizer key is turned

to the “ON” position

 To use the new remote control transmitters,

it is necessary to register the key with both

the electronic immobilizer and keyless entry

system.

Also refer to “Keyless entry system: Cus-

tomer remote control transmitter program-

ming” on page 5-9.

BK0202700US.book 6 ページ２０１３年３月２８日　木曜日　午前１１時５４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi Outlander Sport - 2014 Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info