Bedienungsanleitung Mitsubishi Outlander Sport - 2015 (Seite 364 von 384) (Englisch)

617116

364

Zoom out

Zoom in

Vorherige Seite

1/384

Nächste Seite

Cleaning the outside of your vehicle

Vehicle care and maintenance 9-41

You should flush the underbody with a high

pressure hose every time you wash the out-

side of your vehicle.

Take special care to remove mud or other

debris which could trap and hold salt and

moisture.

After washing your vehicle, wipe off all

waterdrops from the rubber parts around the

doors to prevent the doors from freezing.

N00946000234

Wax your vehicle once or twice a year, or

when water does not bead up on the paint.

Use a soft cloth to put a small amount of wax

on the painted surfaces. After the wax has

dried, polish with a dry soft cloth.

Do not wax your vehicle in direct sunlight.

You should wax when the painted surfaces

are cool.

N00946100046

If painted surfaces have been severely dam-

aged and lost their original luster and color

tone, polish the surface lightly with a fine

polishing compound. Avoid limiting your

polishing to the damaged surface only; polish

a somewhat wider area, moving the polishing

cloth in one direction. After polishing, flush

the compound from the surface and apply a

coat of wax to regain a beautiful luster.

N00946200047

Small cracks and scratches in the paint coat

should be touched up as soon as possible with

touch-up paint to prevent corrosion.

Check body areas facing the road or the tires

carefully for damage to the paint caused by

flying stones, etc. The paint code number for

your vehicle can be found on the vehicle

information code plate in the engine compart-

ment.

N00946300194

Use a sponge or chamois to clean these parts.

If a vehicle wax sticks to a gray or black

rough surface of the bumper, molding or

lights, the surface may appear white in color.

In this case, wipe it off using lukewarm water

and a soft cloth or chamois.

NOTE

 When the door is frozen, opening it by force

may tear off or crack the rubber gasket

installed around the door. Pour warm water

to melt the ice. Be sure to thoroughly wipe

off the water after opening the door. To pre-

vent freezing of the weatherstripping on the

doors, hood, etc., treat with silicone lubri-

cant.

Waxing

CAUTION

 Waxes containing high abrasive compounds

should not be used. These waxes remove rust

and stain effectively from the paintwork, but

are harmful to the finish of the paint, because

they also remove paint/clearcoat.

They are also harmful to other glossy sur-

faces such as the grille, trim, moldings, etc.

 Do not use gasoline, benzine, kerosene or

paint thinners to remove road tar or other dirt

from the vehicle surface.

 Do not put wax on the areas having black

matte coating because it can cause uneven

discoloration, patches, blurs, etc. If these get

wax on them, wipe the wax off right away

with a soft cloth and warm water.

Polishing

Damaged paint

Cleaning plastic parts

CAUTION

 Do not use a scrubbing brush or other rough

scrubber as these may damage the plastic

surface.

 Do not use wax containing compounds (pol-

ishing powder) which may damage the plas-

tic surface.

BK0206700US.book 41 ページ２０１４年３月２５日　火曜日　午後４時４２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi Outlander Sport - 2015 Seite 364

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info