Bedienungsanleitung Mitsubishi RC-E5 (Seite 7 von 19) (Englisch)

583413

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Selection of Weekly timer mode

Up to four schedules with timer operation (ON timer/OFF timer) are available for each day of the week.

Note : Set time every month in Weekly timer mode.

1 Press TIMER button.

2 Press ▼ button for four times.

[ ]

[

]

[ ]

3 Press SET button.

“ ”is displayed in the display area.

4 Press ▲ or ▼ button.

By pressing ▲ or ▼ button, it is possible to choose the item to set.

“

” (for setting the timer)

↕

“

” (for setting the selected day of the week to

holiday)

↕

“ ” (for checking the timer setting and canceling

individual settings)

5 Press SET button.

The selected mode is fixed.

•

2•4 1

WEEKLY TIMER SETTING

1 In the Weekly timer mode, select “ ”

and press SET button confirm.

☞

See step 1 to 5 in the above “Selection of Weekly timer mode”

“ ” (▼ is flashing)

“

” is displayed in the display area.

2 Press ▲ or ▼ button.

Set the ▼ mark above the day of the week to the day to be set

for timer setting. Press ▲ and ▼ to move to the right and left

respectively, ▲ and ▼ will move flashing.

If you press the ▲ button when the “▼” marks are displayed on

from “MON” to “FRI”, and then “SUN” to “SAT” (every day) with

flash, this can be used to apply the same schedule on these days.

Press

RESET button to return to “selecting Weekly

timer mode screen”, and “ ” is displayed.

☞

See the above step 3.

3 Press SET button.

“▼” mark above the day of the week is switched to light, and is fixed.

“ ” is displayed as the left display.

4 Press ▲ or ▼ button.

Up to four schedules can be set for each day. Select the timer

schedule number you want to set. Set either ON timer or OFF

timer for each single operation. (See the left EXAMPLE ).

Press ▼ button to make the ◄ mark next to the number flash and

move downwards.

Press the ▲ button to move the mark upwards.

1◄

Press the

RESET button to return to step 1 display.

3•5•7•9•11•13

2•4•6•8•10

WEEKLY TIMER MODE

• If you press button while timer mode

is operative, timer mode is canceled and the

display will return to the original display.

• If you do not press any button for several minutes

after entering the timer mode, the timer mode

ends and returns to the original display.

NOTICE

[EXAMPLE]

Number 1 :

Number 2 :

Number 3 :

Number 4 :

* Four operations can be set

with only ON timer or only OFF

timer.

HOW TO PERFORM THE TIMER OPERATION < WIRED REMOTE CONTROL >

1 Press TIMER button.

2 Press ▼ button for three times.

[ ]

[

]

3 Press SET button.

[EXAMPLE] “ ” flashes,

“

” lit.

4 Press ▲ or ▼ button.

Set the preferred time to start the operation

Set “Hour”

If you press ▲ or ▼ button for a while, “Hour” display is changed

by one hour, and stops when you stop pressing.

Set “Minute”

If you press ▲ or ▼ button, the display increases or decreases

by ten minutes.

5 Press SET button.

ON timer has been set.

The left display is displayed in the display area.

“

” (lit)

“ ” (lit)

If you press the

RESET button, the remote control will

return to the previous screen.

6 Press ▲ or ▼ button.

Press ▼ button and “ ” is displayed

Press ▲ button and “ ” is displayed

Select either of the above two.

Go to step 7 if temperature is set.

Go to step 9 if set temperature is not set.

7 Press SET button.

The left display is displayed in the display area.

“

”(lit)

“27°C” (The current set temperature is displayed flashing)

“ ” (lit)

8 Press or button to set temperature.

If you press or button, the display increases or

decreases by 1°C.

Set temperature at which you want to start the operation.

If you press the RESET button, the remote control will

return to the previous screen.

9 Press SET button.

ON timer is set, and after “ ” is displayed, it returns

to step 2.

“

” (lit)

“ ” (lights)

“ ” (lit)

“

” (lights)

Set temperature is displayed only in case it is set.

The unit starts to operate at setting time with set temperature.

The time display is turned off.

Press button.

The timer mode is finished.

•

3 2 1

• •

5 4

7 6

•

The unit starts to operate at the set time. It is possible to set temperature at which you want to start the operation.

One setting results in one operation only.

ON TIMER MODE

•

ON timer and either Sleep timer or OFF timer are

set together, the temperature of ON timer is not

displayed.

• ON timer and either Sleep timer or OFF timer are

set together, OFF timer (or Sleep timer) shows

preference.

• If you press the button while timer

mode is operative, timer mode is canceled and

the display will return to the original display.

• If you do not press any button for several

minutes after entering the timer mode, the timer

mode ends and returns to the original display.

NOTICE

PSA012B735A_B_EN.indd 5PSA012B735A_B_EN.indd 5 2010-6-30 9:35:102010-6-30 9:35:10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi RC-E5 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi RC-E5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info