805477
40
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
−39−−38−
 
1 When you tap the Confirm button on the Timer menu screen, the contents of the current timer settings are displayed.
When the warming up is set, is displayed in front of the operation mode on confirmation screen.
Confirm
Confirm
Back
Timer type
OFF:Hours
No setting
ON:Hours No setting
OFF:Clock No setting
ON:Clock No setting
Weekly
(Wed) ON
Sleep 240min. OFF
Setting status
5:00 PM
Weekly timer
· The Clock setting must be made when the weekly timer is used.
· The weekly timer can be set from the main R/C only.
Advice
1 Tap the Menu button on the TOP screen and select Useful functions Weekly timer .
Enter the administrator password if the administrator password input screen is displayed.
There are cases that the Input password screen is displayed by the Permission/Prohibition setting.
2 When the screen to select the setting range, select a day of the week to be set.
Weekdays : Monday - Friday
Sat. Sun : Saturday, Sunday (5)
All days : Monday - Sunday
Each day : Moves to the day of the week setting screen. (3)
You can set four on timer and off timer operations for each day of the week.
Weekly timer
Each day
Back
Select the item.
Sat, SunWeekdays
All days
3
12
4
3 When a desired day of the week is tapped on the display, contents of current setting for the day are displayed. (5)
4 For the holiday setting, tap the block under the day to switch between “ ” (the holiday setting) and “(Blank)” (reset). 
Timer does not operate on the day set as holiday.
Two or more holidays can be set.
To enable the timer on the day set as holiday, it is necessary to reset the holiday setting.
When tapping “All Disable” button, the timer does not operate on all days of the week.
When the timer is used, be sure not to set “All Disable".
5 Screen to check contents of current
setting is displayed.
When the contents are changed or
new setting is added, select a
setting line No. and tap the
Change button.
2
Weekly timer
Select the day of the week.
Invalid Setting:Tap box below day of week.
If invalid is selected, timer won't start
Back
All Disable
Mon Tue Wed Thu Fri Sat Sun
3
1
6 Detail setting screen for the timer
setting contents is displayed.
Tap the State button to switch
between “State Enable” and
“State Disable”.
Tap the Type button to switch
between the “OFF timer” and the
“ON timer”.
Select a desired time (at 5-min
intervals) with the
buttons.
In case of “ON timer” when the
Next button is tapped,
operating conditions at the start
of operation can be set. (7)
Select a line & tap [Change].
Change
Weekdays
Weekly timer
State
Enable
Enable
Enable
Enable
Type Time
Enter Back
Next
ON
ON
ON
OFF
Mode Fan Temp
AutoAuto
1
2
11:00 AM
0:00 AM
0:00 AM
0:00 AM
Weekly timer
Set Back
State
Enable
Tap ▲▼ to set clock time & tap [Set].
Weekdays:No.1
Next
Type
ON
3
1
2
AM
40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mitsubishi RC-EX3 - REMOTE CONTROL wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Mitsubishi RC-EX3 - REMOTE CONTROL

Mitsubishi RC-EX3 - REMOTE CONTROL Bedienungsanleitung - Deutsch - 46 seiten

Mitsubishi RC-EX3 - REMOTE CONTROL Kurzanleitung - Holländisch - 46 seiten

Mitsubishi RC-EX3 - REMOTE CONTROL Kurzanleitung - Französisch - 46 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info