Bedienungsanleitung Mitsubishi SL4SU (Seite 5 von 34) (Englisch)

493636

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

EN – 5

ENGLISH

WARNING:

Unplug immediately if there is something

wrong with your projector.

Do not operate if smoke, strange noise or odor comes

out of your projector. It may cause fire or electric

shock. In this case, unplug immediately and contact

your dealer.

Never remove the cabinet.

This projector contains high voltage circuitry. An

inadvertent contact may result in an electric shock.

Except as specifically explained in User Manual, do

not attempt to service this product by yourself.

Please contact your dealer when you want to fix,

adjust, or inspect the projector.

Do not modify the projector.

It can lead to fire or electric shock.

Do not keep using the damaged projector.

If the projector is dropped and the cabinet is dam-

aged, unplug the projector and contact your dealer

for inspection. It may lead to fire if you keep using

the damaged projector.

Do not face the projection lens to the sun.

It can lead to fire.

Use correct voltage.

If you use incorrect voltage, it can lead to fire.

Do not place the projector on uneven surface.

Place the projector on a level and stable surface only.

Do not look into the lens when the projector is

operating.

It may hurt your eyes. Never let children look into

the lens when the projector is on.

Do not unplug the power cord during

operation.

It can lead to lamp breakage, fire, electric shock or

other trouble. Wait for the fan to stop before unplug-

ging the power cord.

Do not touch the air outlet grilles and bottom

plate.

Do not touch them or put other equipment close to

the air outlet grilles because they become hot during

operation. The heated air outlet grilles and bottom

plate may cause injury or damage to other equip-

ment. Also, do not put the projector on a desk that is

easily affected by heat.

Clean the air-filter once a month.

Clean the air-filter frequently. If the filter or ventila-

tion slots become clogged with dirt or dust, the

temperature inside of the projector may rise and

cause some troubles, such as damage of inside parts,

and shortening the life of the panels.

Do not look into the air outlet grilles when

projector is operating.

Heat, dust, etc. may blow out of them and hurt your

eyes.

Do not block the air inlet and outlet grilles.

If they are blocked, heat may be generated inside the

projector, causing deterioration in the projector

quality and fire.

Place of installation

For safety’s sake, do not use the projector at any

place subjected to high temperature and high hu-

midity. Please maintain an operating temperature,

humidity, and altitude as specified below.

• Operating temperature: between +41°F (+5°C)

and +95°F (+35°C)

• Operating humidity: between 30% and 90%

• Never put any heat-producing device under the

projector to prevent the projector from being

overheated.

• Do not install the projector at a place that is

unstable or subject to vibration.

• Do not install the projector near any equipment

that produces a strong magnetic field. Also re-

frain from installing the projector near any cable

carrying a large amount of current.

• Place the projector on a solid, vibration-free

surface. Otherwise it may fall, causing serious

injury or damage.

• Do not stand the projector on its end. It may fall,

causing serious injury or damage.

• Slanting the projector more than ±10˚(right and

left) or ±30˚(front and rear) may cause trouble or

explosion of the lamp.

• Do not place the projector near air-conditioning

unit or heater to avoid the air outlet and inlet

grilles from being exposed to hot air.

COMPLIANCE NOTICE OF FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-

ference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced Radio / TV technician for help.

Changes or modifications not expressly approved by Mitsubishi could void the user's authority to operate this

equipment.

COMPLIANCE NOTICE OF INDUSTRY CANADA

This Class B digital apparatus complies with Canadian ICES-003.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi SL4SU Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info