Bedienungsanleitung Mitsubishi SL4SU (Seite 21 von 34) (Englisch)

493636

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

EN – 21

ENGLISH

XL5U

CAPTURE : ENTER X2

CANCEL : MENU

CAPTURE : ENTER + ENTER

CANCEL : MENU

XL5U

CAPTURE : ENTER X2

CANCEL : MENU

Setting of the image displayed during

startup or muting

You can display your desired image as the startup screen

(or splash screen). Using the menu, you can also use such

image as a background that is displayed while the video is

muted or no signal is supplied.

Important:

• You can't set IMAGE CAPTURE when PASSWORD

FUNCTION in the FEATURE menu has been set to

SPLASH ID SCREEN to enable the password lock.

Setting procedure

1. Press the COMPUTER button to select the image

supplied to the COMPUTER/COMPONENT VIDEO

IN terminal.

2. Display your desired image.

3. Display the INSTALLATION menu.

4. Select IMAGE CAPTURE by pressing the { or }

button.

5. Press the ENTER button.

• The setting menu will be displayed.

opt.

INSTALLATION

CUSTOM IMAGE CAPTURE

XGA60

BACK COLOR

SIZE

GRAY

CAPTURE

Set the background color

(Set the background color only when you set the image

size to x1 or x2.)

6. Select BACK COLOR by pressing the { or } button.

7. Select your desired color for the background (GRAY,

RED, GREEN, BLUE, BLACK, WHITE, RED50%,

GREEN50%, or BLUE50%) by pressing the $ or %

button.

Set the image size

8. Select SIZE by pressing the { or } button.

9. Select x1, x2, or FULL by pressing the $ or % button.

• The startup screen shown below is for XL5U. When

the LAMP MODE is fixed (see page 16), the different

startup screen is displayed instead.

Capture the image

10. Select CAPTURE by pressing the { or } button.

11. Press the ENTER button.

• A red frame appears. (The size of the red frame is

295x222 pixels.)

12. Adjust the size of the image to be captured so that

such image stays within the red frame.

• Press the {, }, $, or % button to move the red

frame.

• You can’t move the red frame outside the screen.

13. Press the ENTER button twice.

• Image capture will start.

• Press the MENU button to cancel the procedure.

• When the image capture completes, the captured

image will be displayed for three seconds.

Important:

• You can’t change the new startup screen back to

the original startup screen. (Even when you

select RESET ALL in the FEATURE menu, the

factory default screen isn’t available any longer.)

When you want to change the startup screen

again, capture another image.

• The captured image will be displayed from the

next startup. If the captured image isn’t dis-

played, make sure that the setting of SPLASH

SCREEN in the INSTALLATION menu isn’t OFF.

(See page 16.)

• To display the captured image while the video is

muted, set MUTE MODE in the INSTALLATION

menu to IMAGE. (See page 16.)

• When BACK COLOR in the INSTALLATION

menu is set to IMAGE, the captured image will be

displayed while no signal is supplied.

• Some images can’t be captured correctly because

of their signal type.

LVP-XD300

Capturing Logo !

x1 x2 FULL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi SL4SU Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info