Bedienungsanleitung Mitsubishi SL6U (Seite 22 von 32) (Englisch)

493624

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

EN – 22

Advanced features (continued)

FEATURE

PASSWORD FUNCTION

XGA60

opt.

LOCK

UNLOCK

PASSWORD

CONFIRM

O K CANCEL

FEATURE

PASSWORD FUNCTION

XGA60

opt.

LOCK

UNLOCK

PASSWORD

O K CANCEL

Password function

This projector is equipped with the password func-

tion that is designed for prevention of theft and

wrong operation by children and restriction on

operation by other than specified users. The pass-

word function has 3 modes as follows.

DISPLAY INPUT .......... When the projector is turned

on, the startup screen (or splash screen) will

appear and stay on the screen until the password

is entered. When the password is entered, the

startup screen will switch to the regular operation

screen.

MENU ACCESS............ All the buttons except for

the POWER button on the projector are disabled.

(The buttons on the remote control are enabled.)

You can use this mode as a measure of prevention

of wrong operation by children and restriction on

operation by other than specified users.

SPLASH ID SCREEN .. IMAGE CAPTURE and

SPLASH SCREEN in the menu become

unavailable. SPLASH SCREEN will be set to ON

automatically.

To enable the password function:

1. Display the FEATURE menu.

2. Press the { or } button to select PASSWORD

FUNCTION.

3. Press the % button to change the mode among

DISPLAY INPUT , MENU ACCESS , and

SPLASH ID SCREEN .

• When the password has already been set, the mode

won’t be changed. In such cases, press the ENTER

button to cancel the password function and try

again.

4. Press the ENTER button.

• The screen for setting the password function

will appear.

5. Press the ENTER button.

• The screen for entering a password will appear.

6. Enter a 4-digit password using the number but-

tons on the remote control as shown below.

ENTER

645

978

• While the screen for password entry is being

displayed, all buttons on the control panel except

the POWER button will not function .

7. Enter the password again for confirmation using

the same steps.

8. Select OK, and press the ENTER button.

• If the entered passwords don’t match, an error

message will appear.

• To cancel the procedure, press the % button,

select CANCEL, and press the ENTER button.

• You can cancel the procedure by pressing the

MENU button alternatively.

To cancel the password function:

1. Display the FEATURE menu.

2. Press the { or } button to select PASSWORD

FUNCTION.

3. Press the ENTER button.

• The screen for canceling the password function

will appear.

4. Press the ENTER button.

• The screen for entering the password will

appear.

5. Enter the 4-digit password using the number

buttons on the remote control.

6. Select OK, and press the ENTER button.

• If you enter a wrong password, an error mes-

sage will appear.

• To cancel the procedure, press the % button,

select CANCEL, and press the ENTER button.

• You can cancel the procedure by pressing the

MENU button alternatively.

Important:

• If you forget your password, keep pressing the

MENU and ENTER buttons on the control panel

at the same time about 3 seconds to cancel the

password function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi SL6U Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info