Bedienungsanleitung Mitsubishi SRK50ZJ-S (Seite 14 von 24) (Englisch)

515861

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

–13–

ALLERGEN CLEAR operation

Aim the remote control at the air-conditioner.

Press the ALLERGEN CLEAR button.

■ The power of enzymes is used to eliminate allergy-causing allergens that accumulate on

the allergen clear filter.

To stop:

Press the ON/OFF or

ALLERGEN CLEAR button.

• Since the room temperature may change quite a bit, it is recommended that this

be used when no one is in the room. (It completes automatically in approxi-

mately 90 min.)

• During ALLERGEN CLEAR operation temperature, fan speed, airflow direc-

tion and timer operations settings cannot be made.

NOTE

PROGRAM TIMER operation

■ The timer operations of the combination of ON and OFF TIMER. Once this has been set the timer operations will be repeated at the same time every

day unless the ON/OFF button is pressed.

Example: When it is prefered to stop at 22:30, and then start operation at 8:00, near the

set temperature.

■ OFF TIMER operation setting

Set by the procedures on page 11. Set to

■ ON TIMER operation setting

Set by the procedures on page 12. Set to

Timer light (yellow) on the unit will light when the setting is completed.

The set time will be displayed on the remote control unit. The display will

change depending on the operational status.

How to cancel

Press the CANCEL button to turn off the timer display.

Changing of set time

Set a new time by using the OFF TIMER or ON TIMER button.

Comfort Start-up

In ON TIMER operation, the unit starts the operation a little earlier, so that the

room can approach optimum temperature at ON time. This is so called

“Comfort start-up”.

• Mechanism

The room temperature is checked

60 minutes before the ON time.

Depending on the temperature at

that time, the operation starts 5 to

60 minutes before the timer is at

ON.

• The function is available for both

COOL and HEAT operation

mode (including AUTO). It does

not work for DRY mode.

SLEEP TIMER

In COOL operation

(Stop) Operation starts

▼

Check the room

temp. 60 mins.

before.

Set time

▼

When SLEEP TIMER is selected, the set temperature is automatically

adjusted after a while, ensuring that the room is not too cold during cooling or

too warm during heating.

• During cooling : the preset temperature is lowered by 1°C at the start of

SLEEP operation (when the timer is set). After that, the temperature goes

up by 1°C every an hour to become 1°C higher than the present

temperature.

• During heating: Preset temperature is lowered by 1°C at the start of SLEEP

operation (when the timer is set). After that the temperature to becomes

3°C lower in an hour and 6°C lower in two hours than the present

temperature.

(Operation)

Set temperature

With ON TIMER, the air conditioner starts running. Then,

with OFF TIMER, the air conditioner stops running.

With OFF TIMER, the air conditioner stops running. Then,

with ON TIMER, the air conditioner starts running.

RLA012A013_EN_001-022 08/04/2009, 10:4513

Downloaded from www.Manualslib.com manuals search engine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi SRK50ZJ-S Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi SRK50ZJ-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info