Bedienungsanleitung Mitsubishi SRK63ZR-S (Seite 19 von 34) (Englisch)

587228

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

– 18 –

ALLERGEN CLEAR operation

Press the ALLERGEN CLEAR button.

■ The power of enzymes is used to eliminate allergy-causing allergens that

accumulate on the allergen clear ﬁ lter.

To stop:

Press the ON/OFF or

ALLERGEN CLEAR button.

• Since the room temperature may change quite a bit, it is recommended

that this be used when no one is in the room. (It completes automatically

in approximately 90 min.)

• During ALLERGEN CLEAR operation temperature, fan speed, airﬂ ow

direction and timer operations settings cannot be made.

• In case of SCM multi system, ALLERGEN CLEAR control function is

invalid.

• In case of SCM multi system, if ALLERGEN button is pressed by

mistake, the indoor unit which received such command stops.

ON-TIMER + OFF-TIMER operation

■ The timer operations of the combination of ON and OFF-TIMER.

Comfort Start-up

In ON-TIMER operation, the unit starts the operation a little earlier, so

that the room can approach optimum temperature at ON time. This is so

called “Comfort start-up”.

• Mechanism

The room temperature is

checked 60 minutes before

the ON time. Depending on

the temperature at that time,

the operation starts 5 to 60

minutes before the timer is at

ON.

• The function is available

for both COOL and HEAT

operation mode (including

AUTO). It does not work for

DRY mode.

SLEEP TIMER

In COOL operation

(Stop) Operation starts

▼

Check the room

temp. 60 mins.

before.

Set time

▼

When SLEEP TIMER is selected, the set temperature is automatically

adjusted after a while, ensuring that the room is not too cold during

cooling or too warm during heating.

• During cooling: The preset temperature is lowered by 1°C at the

start of SLEEP operation (when the timer is set). After that, the

temperature goes up by 1°C every an hour to become 1°C higher

than the present temperature.

• During heating: The preset temperature is lowered by 1°C at the

start of SLEEP operation (when the timer is set). After that the

temperature becomes 3°C lower in an hour and 6°C lower in two

hours than the present temperature.

(Operation)

Set temperature

How to cancel

Press the CANCEL or ON/OFF button to turn off the timer display.

Changing of set time

Set a new time by using the OFF-TIMER or ON-TIMER button.

NOTE

•

Timer operation can be set only for next 24 hours.

Example: Present time is 21:00. The air-conditioner running.

When it is prefered to stop at 22:30, and then start operation at 8:00, near the set

temperature.

First the air-conditioner starts running with ON-TIMER.

After the air-conditioner stops running with OFF-TIMER.

First the air-conditioner stops running with OFF-TIMER.

After the air-conditioner starts running with ON-TIMER.

OFF-TIMER operation setting

Set by the procedures on page 16. Set to

ON-TIMER operation setting

Set by the procedures on page 17. Set to

Timer light (yellow) on the unit will light when the setting is completed.

■ The set time will be displayed on the remote control. The display will change

depending on the operational status.

• The air-conditioner stopping.

• The air-conditioner running.

RLD012A002G_EN.indd 18RLD012A002G_EN.indd 18 2015/02/27 14:36:412015/02/27 14:36:41

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi SRK63ZR-S Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi SRK63ZR-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info