Bedienungsanleitung Mitsubishi SRK80ZM-S (Seite 18 von 34) (Englisch)

604723

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

–17–

ALLERGEN CLEAR operation

Aim the remote control at the air-conditioner.

Press the ALLERGEN CLEAR button.

■ The power of enzymes is used to eliminate allergy-causing allergens that accu-

mulate on the allergen clear filter.

To stop:

Press the ON/OFF or

ALLERGEN CLEAR button.

• Since the room temperature may change quite a bit, it is recommended

that this be used when no one is in the room. (It completes automati-

cally in approximately 90 min.)

• During ALLERGEN CLEAR operation temperature, fan speed, airflow

direction and timer operations settings cannot be made.

• In case of SCM multi system, ALLERGEN CLEAR control function is

invalid.

• In case of SCM multi system, if ALLERGEN button is pressed by mistake,

the indoor unit which received such command stops.

NOTE

ON-TIMER + OFF-TIMER operation

■ The timer operations of the combination of ON and OFF-TIMER.

Example: When it is prefered to stop at 22:30, and then start operation at 8:00, near the set

temperature.

■ OFF-TIMER operation setting

Set by the procedures on page 15. Set to

■ ON-TIMER operation setting

Set by the procedures on page 16. Set to

Timer light (yellow) on the unit will light when the setting is completed.

The set time will be displayed on the remote control. The display will change de-

pending on the operational status.

Comfort Start-up

In ON-TIMER operation, the unit starts the operation a little earlier, so

that the room can approach optimum temperature at ON time. This is

so called “Comfort start-up”.

• Mechanism

The room temperature is

checked 60 minutes before

the ON time. Depending on

the temperature at that time,

the operation starts 5 to 60

minutes before the timer is at

ON.

• The function is available for

both COOL and HEAT opera-

tion mode (including AUTO).

It does not work for DRY

mode.

SLEEP TIMER

In COOL operation

(Stop) Operation starts

▼

Check the room

temp. 60 mins.

before.

Set time

▼

When SLEEP TIMER is selected, the set temperature is automatically

adjusted after a while, ensuring that the room is not too cold during

cooling or too warm during heating.

• During cooling : The preset temperature is lowered by 1°C at the

start of SLEEP operation (when the timer is set). After that, the tem-

perature goes up by 1°C every an hour to become 1°C higher than

the present temperature.

• During heating: The preset temperature is lowered by 1°C at the

start of SLEEP operation (when the timer is set). After that the tem-

perature becomes 3°C lower in an hour and 6°C lower in two hours

than the present temperature.

(Operation)

Set temperature

With ON-TIMER, the air conditioner starts running. Then,

with OFF-TIMER, the air conditioner stops running.

(Example Present time : 5:00 The air conditioner stopping.)

With OFF-TIMER, the air conditioner stops running. Then,

with ON-TIMER, the air conditioner starts running.

(Example Present time : 20:00 The air conditioner running.)

How to cancel

Press the CANCEL button to turn off the timer display.

Changing of set time

Set a new time by using the OFF-TIMER or ON-TIMER button.

RKW012A412D_EN_001-032 4/15/14, 13:5517

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi SRK80ZM-S Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi SRK80ZM-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info