Bedienungsanleitung Mitsubishi WD-52525 (Seite 65 von 108) (Englisch)

475284

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Antenna Menu

Figure 13

The Antenna Menu options are available for use with

analog and digital channels on Antenna-1 and Antenna-

2. You can memorize channels, add or delete channels,

name channels and add channels to an SQV (Super

Quick View™) list.

Memorize

For Antenna 1 (Main) or Antenna 2 (Aux)

Select either Air (when used with an indoor/outdoor

antenna) or Cable (when used with direct cable)

then press ENTER to start the automatic channel

memorization process. If a CableCARD™ is being

used, memorized channels are provided by your cable

provider through the CableCARD.

To stop the automatic channel memorization process,

press CANCEL. Channels memorized before you

pressed CANCEL are retained in memory.

After memorizing channels, the channels in the memory

can be accessed in ascending or descending order by

pressing CH or .

The memorization will occur twice, as the TV

memorizes analog and digital channels separately.

Prefer Digital

When a memorized channel is available as both analog

and digital, a check mark in the Prefer Digital box will

allow digital channels to display and analog channels to

be hidden (when using CH). Removing the checkmark

will show both analog and digital choices.

Antenna Menu

Channel

Channels can be changed in 3 ways:

1. By pressing ADJUST or to select the channel.

2. By pressing CH or for channels already in

memory.

3. Directly entering the number. With so many current

and potential channels, the number range is greatly

expanded. Channels can be one part, analog or

digital (up to the number 16383) or two part, for

digital channels (these use a separator). For a

two part digital channel, you may press SUB/

CANCEL on the remote to enter a separator after

the first, second or third number, depending on the

broadcaster’s channel information.

For digital channels, when the broadcaster has

sent a virtual channel number, the virtual channel

number is shown in the text box and the original

digital channel is shown below on-screen, as a

reference.

Memory

After the available channels have been memorized with

Memorize, weaker channels can be added. Unwanted

channels can also be deleted. Press CH or on

the remote control to see the channels in memory.

Press ADJUST or to select Added or Deleted for

the channel shown in the Channel number box.

Name

Analog channels shown on Antenna-1 or Antenna-2

can be named (up to four characters). After you enter

a name, it will appear on the TV screen, next to the

channel number.

1. Press ADJUST or to select each letter.

2. Press ENTER to set the letter and move to the

next letter position.

3. Press CANCEL to move back one position.

Digital channels are automatically named if the

broadcaster sends the information.

Figure 13. Antenna Menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD-52525 Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info