475284
76
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
76
Chapter . . .
Press PIP/POP to activate the PIP/POP option. With
each press of the PIP/POP button on the TV remote
control (within 3 seconds of each other), the PIP/POP
will cycle through the following display options:
POP
side-by-side
pictures
3 POP
9 POP
• PIP large
• PIP small
• PIP/POP: off
Operation of PIP and POP
To turn PIP/POP off, wait at least 10 seconds, and
press PIP/POP. The next time you activate PIP/POP,
the last used PIP/POP option will be displayed
Changing PIP/POP Device
Press PIP DEVICE to change the PIP or POP picture
source device. A menu similar to the Device Selection
menu will be displayed.
Changing PIP/Side-by-Side Channels
Press PIP CH to scroll up and down through
memorized channels on Ant-1 and Ant-2.
Exchanging Program Images
Press EXCH to exchange the main picture and the PIP/
POP picture. Pictures from digital channels can only
be shown as the main picture.
Moving PIP Image
If no menus are on the screen, press ADJUST , ,
or to move the PIP display anywhere on the main
screen.
Automatic POP Switching
When automatic POP switching is active, the TV will
cycle through memorized analog channels on Ant-1 or
Ant-2 or strobe pictures from other A/V components
in the POP display. Press PAUSE to pause or restart
automatic POP switching.
Selecting POP “Live” Image
Press ADJUST , , or to select a different POP
“live” image (automatic POP switching must be paused.)
Freezing the PIP and Side-By-Side Picture
Press PAUSE to freeze the PIP and side-by-side
images. Press PAUSE again to return to a “live” image.
MAIN
PICTURE
Side-by-Side
PIP Ant-1 17
Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1
PIP
Side-by-Side cannot show the same channel
or device on both sides.
When Ant-1 or Ant-2 is the main picture,
Ant-2 is not available as the PIP, POP or Side-
by-Side.
PIP/POP is not compatible with signals from
media cards.
MAIN
PICTURE
POP 1
POP 2
POP 3
MAIN
PICTURE
POP 1 POP 2 POP 3
POP 4 POP 5 POP 6
POP 7 POP 8 POP 9
PIP Ant-1 17
Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1
PIP
You can display programs from analog channels, analog inputs or devices as Picture-In-Picture (PIP) and Picture-
Outside-Picture (POP). The TV has a second analog tuner for non-scrambled analog channels received on Ant-1 and
will display them as the PIP/POP sub-pictures. Digital channels and devices can be shown as the main picture but
cannot be the sub-picture. PC screens can be viewed in the side-by-side mode.
Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1
IMPORTANT
76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mitsubishi WD-52525 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info