Bedienungsanleitung Mitsubishi WD-52525 (Seite 97 von 108) (Englisch)

475284

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

1. The TV remote control does not work. • Check that the batteries are installed correctly.

• Check that the selected switch is set to “TV”.

• Be no further than 20 feet from the TV when using the remote control.

• Program the remote control to operate the TV (Appendix C).

2. The TV takes several seconds to respond. • It is normal for digital channels to take longer to tune in.

• Press ENTER after a channel number to avoid delays.

• Use a 4 digit number for an over-the-air digital channel

• Use a 6 digit number for cable digital channels

3. Cable provider needs information to start

CableCARD™ service.

• On the remote control, press TV MENU and then enter the numbers

999 to display the Host ID and CableCARD™ ID information.

4. You cannot access a channel. • Use number keys instead of CHANNEL up/down.

• Be sure the channel you want to view is in memory. See page 65.

• Check that the TV is turned to the correct device or antenna for

that channel, by pressing the DEVICE button.

• Make sure the V-Chip lock is off.

• If tuned to Digital channels, have physical channel in memory.

5. On-screen displays appear each time you

change a function.

• This is part of normal TV operation.

6. You cannot program the TV to turn on

automatically (timer function)

• The TV may be locked.

• The clock may not be set.

7. There is no sound even when the volume is

turned up.

• Check audio source in Device Menu.

• Check to see if the MUTE button is on.

• The TV’s “Listen to:” setting may be set to SAP.

• Check that the “TV Speakers” setting is On in the Audio/Video menu.

8. NetCommand unable to learn specific device

keys.

• Device does not use IR format for remote control signal. ITT and

RF formats cannot be learned.

• Room lighting may affect the signal. Have the remotes very close

(6 inches or less) to the TV during Learning.

• If using a Mitsubishi remote control make sure slide switch is not

set to TV position.

• Some but not all device key functions can be learned by

NetCommand. For example, POWER and PLAY may be learned,

but other functions may not.

• The signal from the remote control may not be strong

enough. Insert fresh batteries and try Learning again.

9. You have forgotten your V-Chip passcode. • See Appendix A, Bypassing the V-Chip Lock.

10. Lamp indicator light is a constant red. • Turn the TV off for at least 2 minutes. Turn back on. If light is still

red, the lamp has failed, replace it. See Appendix H for lamp

replacement information.

11. Lamp indicator light is a constant yellow. • Lamp’s elapsed time has exceeded 4,000 hours. Purchase a new

lamp. See Appendix H for lamp replacement information.

12. Lamp indicator light is a flashing yellow. • Lamp cover door is open or lamp cartridge is not secure. See

Appendix H for lamp replacement information.

13. Status indicator light is a constant yellow. • Operating temperature or room temperature has exceeded proper

levels. Clean the TV’s dust filter or cool the room. See Appendix H

for filter cleaning information.

14. Status indicator light is a constant/flashing red. • Service is required. Contact your dealer or a Mitsubishi Authorized

Service Center to arrange for a service evaluation listings of

Mitsubishi Authorized Service locations can be obtained from our

web site, www.mitsubishi-tv.com or by calling 1-800-332-2119.

15. PIP does not display a picture. • Make sure the V-Chip lock is off.

• Not all inputs can be displayed as a PIP.

16. Digital channels do not appear in PIP. • Normal PIP operation.

17. Not all channels appear in multiple PIP/POP. • Digital channels do not display in PIP/POP.

Problem Possible Solution

Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD-52525 Seite 97

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info