Bedienungsanleitung Mitsubishi WD-62628 (Seite 23 von 124) (Englisch)

475319

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Chapter 2. Connecting 23

Using a CableCARD

After inserting a CableCARD into the TV back panel

CableCARD slot and powering On the TV, the initialization

process begins. An initial screen will automatically

display for a few minutes, with information that your

Cable Provider will need in order to start service. Please

write down this information before calling your cable

provider.

Please call XYZ Cable

at xxx-xxx-xxxx to

activate cable service.

They will need these numbers:

Host ID X-XXX-XXX-XXX-XXX

CableCARD

ID: X-XXX-XXX-XXX-XXX

See owner's manual for

further information

An example of an initial screen is shown here. Your

screen will display specific information from your cable

provider and may not look like this screen.

If you were unable to record the information, you can

press TV MENU on the remote and then enter the

number 999 and the screen will re-display. You can

also press DEVICE MENU when the CableCARD is the

selected source and you will be able to select the startup

application.

Using a CableCARD

CableCARD Technology

CableCARD is a nationwide system standard that allows

your local cable TV provider to supply you with an access

card customized to your account. This card allows your

TV to receive, decode and unscramble the premium

digital channels included in your cable TV subscription

without the use of a cable box. It also allows your

cable provider to automatically update and change your

subscription. When you move to a new cable provider’s

area, you simply return the CableCARD to the original

cable provider and get a new card from your new cable

provider.

Please note that CableCARD is a new technology and

your local cable provider may not currently be offering

this service. As time passes, this system will become

broadly supported by most cable providers.

The CableCARD system is “unidirectional” which means

your cable provider can send updates to the access

card and TV, however, the TV cannot send back signals

such as requests for Video-On-Demand or Pay-per-View

programs by remote control.

Digital cable channels authorized by the CableCARD

will be available on the Firewire® IEEE 1394 network

and can be shared by other products on the network.

Some digital channels or programs may not be copied

or recorded because of copy restriction limits set by the

content owners or copyright holders.

The digital television is capable of receiving analog

basic, digital basic, and digital premium cable

television programming by direct connection to a

cable system providing such programming. A security

card (CableCARD) provided by your cable operator is

required to view encrypted digital programming. Certain

advanced and interactive digital cable services, such as

video-on-demand, a cable operator’s enhanced program

guide, and data-enhanced television services, may

require the use of a set-top box. For more information,

call your local cable operator.

Please see page 17 for instructions on how to insert the

CableCARD.

IMPORTANT

To use a CableCARD, the primary incoming

cable must be connected to ANT-1 MAIN.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD-62628 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info