Bedienungsanleitung Mitsubishi WD-62628 (Seite 76 von 124) (Englisch)

475319

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

76 Chapter 5. TV Menu Operations

V-Chip Lock Menu

V-Chip Lock Menu Overview

Figure 20

The V-Chip Lock menu gives you access to three different

types of TV locks. You must use a pass code to open

this menu to enable/disable the lock options. The three

different types of locks available are:

• V-Chip

Lets you restrict access to programming based on

program-rating signals sent by the broadcaster. You

can also set the time of day for these restrictions to

be in effect.

• Lock by Time

Lets you restrict all TV viewing by time of day.

• Front Button Lock

Lets you disable the controls on the front of the TV.

Use this option if there are small children near the TV

who may be tempted to press the front-panel buttons.

V-Chip Icon

Lock TV by

Time

Front Button

Lock On/Off

Figure 20. V-Chip Lock menu

Setting a Pass Code

You are prompted to enter a pass code whenever you

select V-Chip Lock on the menu or press the V-CHIP key

on the remote control. To set a pass code for the first

time:

1. Do one of the following:

• PressV-CHIPontheremotecontrol.

• PressTVMENU,highlightV-ChipLock,then

press ENTER.

A screen prompting you for a pass code displays.

2. Input a four-digit pass code using the number keys on

the remote control.

• PressCANCELtodeleteanumberandmove

back one space.

• PressMENUorHOMEtoexitwithoutsetting

a pass code.

3. Press ENTER to confirm the pass code just input.

To reset the pass code, see the procedure in Appendix C.

V-Chip Menu

Figure 21

The V-Chip menu allows you to:

• TurntheV-ChipLockonoroff

• ChangethepermittedV-Chipratinglevel

• Setthetimeofdaytoenforceratingrestrictions

The TV comes from the factory with pre-set V-Chip

ratings and with the V-Chip Lock turned off. The preset

ratings are TV-PG (TV rating) and PG (movie rating). If

you turn on the V-Chip, these presets will allow only

programs rated TV-PG/PG or lower. You can turn on

V-Chip from this menu or by using the V-CHIP button on

the remote control. Use the V-Chip menu to change the

permitted rating levels.

After changing channels or devices, there may be a delay

of up to five seconds before the V-Chip lock takes effect.

Figure 21. V-Chip menu

Setting V-Chip Options

1. Highlight the V-Chip icon on the V-Chip Lock

menu (figure 20) and press ENTER to open the V-Chip

menu (figure 21).

2. Press ADJUST or to select On or Off.

3. If you selected On, press ADJUST to move to the

TV Rating box.

4. Press ADJUST or to select the TV rating level

you want to allow.

5. Press ADJUST to move to the TV content

categories.

• PressADJUST or to move between

categories.

• PressENTERtoaddcheckmarkstotheTV

content categories you want to block.

IMPORTANT

If you forget your four-digit pass code, see

Appendix C.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD-62628 Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info