Bedienungsanleitung Mitsubishi WD-65837 (Seite 74 von 88) (Englisch)

475272

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

74 Appendices

Reset Name When to Use How to Use Resulting Action

A/V Reset

(for all inputs)

To reset audio and

video adjustments for

all inputs to the original

factory settings.

While viewing the TV, press the

control-panel buttons

ACTIVITY

and

VOLUME DOWN

at the same time for at

least two seconds.

All Audio and Video settings are

returned to the original factory

settings, including Listen To,

Language, audio Balance,

Closed Captions, and Format.

Channel

Memorization

To erase and

re-memorize channels

on the

ANT

input.

While viewing the TV, press 1.

to display the main menu.

Navigate to the 2. Initial> Channel

menu.

Press 3.

ENTER.

Highlight the reception mode, 4.

e.g. Ant Air.

Highlight 5. Scan.

Press 6.

ENTER

to start channel

memorization.

All previously memorized chan-

nels for the antenna input are

erased and a new set of memo-

rized channels is created. To add

or delete individual channels, see

Initial > Channel > Edit menu

instructions on page 39.

Lock Menu

Pass Code

To change your Lock

menu pass code

See the

cutout page from Appendix B,

page 65.

Allows establishment of a new

code.

Control-Panel

Lock Release

To re-enable the

control-panel buttons

after activation of the

Control-Panel Lock

Press and hold the

ACTIVITY

button

on the control panel for ten seconds.

If the TV is powered off, you can

now press the

POWER

button to turn

it on.

Allows the control panel to be

unlocked if the remote control is

misplaced.

Auto Input

Sensing for

HDMI

If the New Device

Found screen does

not appear when you

connect an HDMI

device.

Disconnect the HDMI device.1.

Delete the HDMI input in the 2.

Inputs > Name menu (see page

40).

Power on and connect the new 3.

device.

The New Device Found screen

will display.

System Reset If the TV does not turn

on or off, does not

respond to the remote

control or control-

panel buttons, or has

audio but no video.

Press and hold the

POWER

button on

the control panel for ten seconds.

The TV will turn off. Power on the

TV and the green LED will flash

quickly for about one minute. The

changes you made most recently,

before using

SYSTEM RESET

, may

be lost.

TV Reset

IMPORTANT:

Use this reset

only if other

troubleshooting

has been unsuc-

cessful.

To reset all consumer-

accessible settings

and all memories to

the original factory

defaults.

Use TV Reset if the TV

can respond to con-

trols but TV behavior is

abnormal.

CAUTION: All owner-

performed setups and

adjustments will be

erased.

While viewing the TV, press 1.

to display the TV main

menu.

With the main menu displayed, 2.

press number keys 1 2 3 to

display the Reset menu.

READ THE ON-SCREEN 3.

WARNING AND INSTRUC-

TIONS.

If you do not wish to use this •

reset, press

BACK

back out.

If you do wish to use the •

reset, press

ENTER

to erase

all memories and settings.

The TV will start the initialization

process and then turn off.

Power on the TV and the front

green LED will start flashing. All

memory and settings outlined in

this Owner’s Guide will need to

be set again.

Appendix E: Troubleshooting, continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD-65837 Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info