Bedienungsanleitung Mitsubishi WD-65C8 (Seite 79 von 94) (Englisch)

475326

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

Appendices 79

Resolving CEC Conflicts, Changing HDMI

Connections, Removing HDMI Devices

Because each manufacturer selects which CEC func-

tions to support, some devices can conflict with other

devices. If control conflicts arise, you can:

Turn off CEC in the other device’s setup menu.•

Turn off TV control of an individual CEC device (see •

fiugre 5 below).

Reset TV control of an individual CEC device (see •

figure 6 below).

Turning Off the TV’s HDMI Control of an Individual

CEC Device (Figure 5)

Press

on the TV remote control to enter the TV

Main menu.

Select the

Inputs menu using the keys.

Select the

Inputs > Name menu using the key.

Highlight the device to remove using the

key and

then the key.

With the device highlighted, select

Control Off to

turn off the TV’s ability to control the device.

Press

EXIT

to clear the menus.

Figure 5. Inputs > Name menu with HDMI Control for

AVR Tuner turned off

Resetting HDMI Control or Removing an HDMI

Device (Figure 6)

Power off the device.

If removing the device, disconnect the HDMI cable.

Press

on the TV remote control to enter the TV

Main menu.

Select the

Inputs menu using the keys.

Select the

Inputs > Name menu using the key.

Highlight the device to reset using the

key and

then the key.

With the device highlighted, select

Delete to reset

HDMI Control.

Press

EXIT

to clear the menus.

If the device is still connected, the Auto Input

Sensing screen will display.

Figure 6. Inputs > Name menu with AVR DVD deleted.

Using NetCommand HDMI Control

As an example of using NetCommand for HDMI

devices, you would press

PL AY

on the device itself to:

Turn on the TV if not already on•

Switch to the device (no need to display the • Input

Selection menu)

Begin play of the device•

Test your equipment with the TV’s remote control to

find out which commands are supported. See the table

below for commands that may be available, depending

on the individual device.

CEC-enabled VCR, DVD, and DVR functions that

may be available:

Record/

Playback

Navigation

Channel Tuning Other

GUIDE

ENTER

Digits

0–9

—

CANCEL

(content)

—

CANCEL

(to cancel)

ENTER MENU

The

key defaults to work like the device’s

LIST

key.

If you have a CEC-enabled A/V receiver, CEC-enabled

devices connected to the A/V receiver with an HDMI

cable may also be controllable. They can be selected

from the TV’s Input Selection menu.

CEC-enabled A/V receiver functions that may be

available:

Try the •

VOL

MUTE

, and menu-navigation keys.

To open the A/V receiver menu, follow these steps:•

While watching TV, press 1.

AUDIO

Press 2. repeatedly until the Speakers option

displays.

While3. Speakers is still displayed, press

736 or 835 Series TV. You can use NetCommand IR

“learning” to add commands to those supported by

CEC. You must first connect and place IR emitters for

the devices.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD-65C8 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info