Bedienungsanleitung Mitsubishi WD-65C9 (Seite 73 von 88) (Englisch)

475275

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Appendices 73

Reset Name When to Use How to Use Resulting Action

Format When the picture

shape seems

incorrect, use

MORE > 0

(FORMAT) to

change the shape of

the picture.

Press the

key and then repeat-

edly press

(FORMAT) to cycle

through the available aspect ratios.

The last-used format for a signal

type is memorized for each input.

The next time the same input and

the same signal type is viewed,

the last-used format will be

recalled.

PerfectColor

™

Reset

PerfectColor

™

PerfecTint

™

Reset (837

Series)

(for the single

input currently

being watched)

When the color

intensities seem out

of balance, use the

PerfectColor/PerfecTint

reset to reset the color

balances to the original

factory settings.

Both PerfectColor and

PerfecTint are reset at

the same time.

While viewing the input to 1.

be reset, press

and

go to Adjust > Picture

PerfectColor.

Press 2.

ENTER

to display the

PerfectColor adjustment screen.

Press 3.

CANCEL

to reset the colors.

All PerfectColor/PerfecTint

sliders are reset to the original

center position. The PefectColor/

PerfecTint settings for other

inputs remain unchanged.

A/V Memory

Reset

(for the single

input currently

being watched)

When audio and/

or video settings for

a single input seem

incorrect, use A/V

Memory Reset to

return the input to

the original factory

settings.

While viewing the input to reset, 1.

press

and go to Adjust >

Reset.

Press 2.

ENTER

to highlight the

Reset icon.

Press 3.

ENTER

again to reset.

All Audio and Video settings

for the individual input are

reset except for the Listen To,

Language, audio Balance,

Closed Caption, and Advanced

Picture settings.

TV Reset Comparison Guide

You can resolve many common TV problems using

the reset functions described in the following table.

See also the troubleshooting suggestions later in this

appendix.

IMPORTANT

Before you change sound or picture settings: If

picture or sound settings seem wrong for a broadcast

channel (a channel from the

ANT

input, a cable box, or

satellite receiver), first check other channels from the

same input before changing settings. If most other

channels from the same input seem correct, there is

likely a problem with the broadcast rather than with the

TV. Use care in this case, as changes you make to fix

problems on individual channels also affect all other

channels on the same input.

Appendix E: Troubleshooting

Service and Customer Support

Service

If you are unable to correct a problem with your TV,

consult your Mitsubishi dealer or Mitsubishi Con-

sumer Relations at (800) 332-2119.

• DONOTadjustanycontrolsotherthanthose

described in this Owner’s Guide.

• DONOTremovetheprotectivebackcoverof

your TV.

Customer Support

• Toorderreplacementoradditionalremotecon-

trols or lamp cart

ridges,

visit our website at www.

mitsuparts.com or call (800) 553-7278.

• Forquestions:

Call Consumer Relations at 800-332-2119.

E-mail: MDEAservice@mdea.com

Website: www.mitsubishi-tv.com

Important

All lamps replaced under warranty must be returned

to Mitsubishi where they will be inspected for defect

verification.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD-65C9 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info