Bedienungsanleitung Mitsubishi WD-65C9 (Seite 77 von 88) (Englisch)

475275

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Appendices 77

Appendix E: Troubleshooting, continued

Picture

Symptom Remarks

1. Picture does not look like a high-definition

picture.

Not all signals are high-definition signals. To receive high-defini-

tion programming from your cable or satellite provider, you must

subscribe to the provider’s high-definition service. Some over-

the-air broadcasts are in high-deﬁnition and can be received with

a high-quality antenna suited to your location.

2. TV has sound but no picture. Check that all video inputs are plugged in firmly.•

Press and hold the POWER button on the control panel for •

ten seconds to perform System Reset.

3. Picture has become dimmer. • Thelampisnearingtheendofitslife.Orderanewlamp.

• Adjustpicturebrightnessandcontrasttomaximumlevels.

• ChangeLampEnergyfromStandardtoBright.

4. There is a large black or gray rectangle on

the screen.

The TV’s analog closed captioning has been set to “text” mode

in the Captions menu. Turn off because there is no text informa-

tion being broadcast.

5. You cannot view a picture when playing a

VHS tape.

Check your VCR’s owner’s guide for further troubleshooting.

6. VCR or DVD player’s on-screen menus jitter

up and down.

Stop playback. Possible cause: Many VCRs and DVD players

provide on-screen menus at only half-resolution that may

appear to jitter up and down.

7. When viewing a stopped VCR, white lines

are rolling on the screen.

• TurnoffvideomutefortheVCR.

• Beginplayingthetape.

• ChangetheVCRinputfromLine1totheVCRantennainput.

8. A color program appears as a black and

white image, or the colors are dim, or the

screen is black.

The PerfectColor color balance has been incorrectly set. Reset

the PerfectColor balance.

9. Picture from an HDMI input is noisy (poor

quality).

Upgrade a Category 1 (unmarked) HDMI cable to a Category 2

high-speed HDMI cable.

10. The image from a computer appears dis-

torted when viewed on the TV.

Normal TV operation. The TV does not correct distortion in •

the picture from a computer because the correction process

may cut off the edges of the image.

The aspect ratio may be wrong for the image. Press MORE •

and then 0 (FORMAT) to change.

Sound

Symptom Remarks

1. There is no sound even when the

volume is turned up.

• CheckiftheMUTEkeyison.

• TheTV’s“Listento:”settingmaybesettoSAP(analogprogram

from the ANT input) but no SAP is being broadcast.

• CheckthattheSpeakersoptionissettoTVtohearsoundfrom

the TV speakers. Possibly sound is being sent to one of the audio

outputs for an A/V receiver or headphones.

• IfusinganA/Vreceiver,checkthattheSpeakersoptionissettoAV

Receiver to hear sound from the A/V receiver speakers.

•

Press and hold the POWER button on the control panel for 10

seconds to perform System Reset.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD-65C9 Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info