Bedienungsanleitung Mitsubishi WD-73827 (Seite 68 von 128) (Englisch)

475282

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

68 Chapter 5. TV Menu Operations

TV Pause

Figure 11

With TV Pause, you can interrupt watching a program

and then resume watching it later without missing any

of the program. You can begin watching a program

after the start of the broadcast and still be able to view

the part already broadcast. This is possible because

the TV Pause feature automatically creates a temporary

recording on the internal TV Disc. You can then search

forward and backward through the recorded portion of

the program while the program broadcast continues.

Use TV Pause with the TimeShuttle feature if you want to

search visually for a specific program segment.

The recording created by TV Pause is temporary and

will be automatically overwritten. If you wish to save the

program for later viewing, press REC to display the record

menu and begin a standard, storable recording. You can

also press GUIDE to display ChannelView or TV Guide On

Screen® to make a recording.

When you press PAUSE to pause a TV program during

broadcast, an on-screen slider shows approximately how

far and in which direction(s) you can search (see figure

14). TV Pause is available for CableCARD™, Ant-1, Ant-2,

IEEE 1394 tuner devices and other tuning devices (cable

boxes or satellite receivers connected to Inputs 1–3).

TV Pause has three settings:

• OnRequest:TVDiscisinthestandbymodeuntilyou

press PAUSE for the first time after turning on the TV,

or after a channel or device change. There is a delay

of a few seconds before a paused picture appears.

With this option, the TV Disc turns on and then starts

recording automatically when you first press the

PAUSE button. As the broadcast continues, you can

scan or skip backwards in the TV program to the

point where the TV Disc started recording.

TV Disc returns to the standby mode automatically

when you change the channel or device. The PIP/

POP features are available only when TV Pause is in

standby mode and not enabled.

• Always:Withthisoption,theTVDisciscontinuously

recording while the TV is on. You can skip or scan

backward as far as the last channel or device change.

You can also scan or skip forward to catch up to

the live broadcast. Press PAUSE, REW, FF or any

ADJUST button to pause the program and scan or

skip within the program.

In the Always setting, the PIP/POP features are not

available. To use the PIP/POP features, select the Off

or On Request setting for TV Pause.

• Off:ThisoptionpreventsoperationoftheTVPause

feature.

When TV Pause is set to Off, you can use the PAUSE

key for standard full-screen picture freeze.

If you do not expect to use the TV Pause features, we

recommend the Off or On Request mode. These modes

allow use of PIP/POP features.

Figure 14. TV Pause slider. 1. Limit of backward scan.

2. Current viewing point in recorded portion of program.

3. Current broadcast point (limit of forward scan)

Controlling TV Pause Features

NOTE: You can reverse search as far back as the

beginning of the filled space shown on the slider. You can

forward search up to the current broadcast point.

• PressPAUSEtopausethecurrentTVprogramor

resume play after pause.

• PressPLAYtoresumewatchingtheTVprogramfrom

the pause point.

• PressFFtoforwardpicturescan.Pressuptofour

times to increase the scan speed. If pressed when

TV is paused, will move forward at half speed, not

fast forward. When TimeShuttle is enabled, FF can

be used to open the view shown in figure 15.

• PressREWtoreversepicturescan.Pressupto

four times to increase the scan speed. If pressed

when TV is paused, will reverse at half speed. When

TimeShuttle is enabled, REW can be used to open

the view shown in figure 15.

• PressADJUST to skip backwards 12 seconds for

each press.

• PressADJUST to skip forward 30 seconds for each

press.

• PressADJUST to skip all the way to live broadcast.

• PressADJUST to skip back to the earliest available

part of the TV program as shown on the slider.

NetCommand® Menu , continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD-73827 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info