Bedienungsanleitung Mitsubishi WD-73838 (Seite 34 von 110) (Englisch)

475257

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

34 3. TV Features

For assistance call 1(800) 332-2119

Watching 3D Video

Note: Active 3D glasses are required

Switch the TV to the 3D video device. Press

INPUT

then highlight the icon for the 3D video device. Press

ENTER

Press

and select the Picture > 3D Mode

menu.

For Glasses Control, select the control type for

your 3D glasses, either IR Emitter or DLP Link.

For Source Format, select Automatic and press

ENTER

. Press

EXIT

to close the menu.

• If the image looks correct, the device is HDMI

1.4a compliant. Always keep the setting at

Automatic for this device.

• For non-compliant 3D sources, open the

Picture > 3D Mode menu and select a source

format based on how the picture looks:

Side by Side

Screen split vertically

Top/Bottom

Screen split

horizontally

Checkerboard

Blurry double image

(Checkerboard

setting is always

required for check-

erboard signals

)

Notice Concerning 3D Format Compatibility

(TV Software Versions 012.06 and later)

Mitsubishi 738 series and 838 series 3D televi-

sions (the “TVs”) will no longer require the use of an

adapter when loaded with the software version of

012.06 (the “Software Update”). After the Software

Update, the TVs will support the mandatory HDMI

1.4a 3D signals intended for the United States. Spe-

cifically, the TVs will support the 3D signals known as

Frame Packing 1080p/24Hz and 720p/60Hz (pri-

marily from Blu-ray players and gaming consoles),

Side-by-Side in 1080i/60Hz, 1080p/24Hz/30Hz/60Hz

and 720p/60Hz, Top/Bottom in 1080p/24Hz and

720p/60Hz, and Checkerboard 1080p/60Hz.

However, there may be some 3D sources that are

not compatible with the TVs even after the Software

Update. In all cases: (1) 3D sources must connect to

the TVs using the HDMI inputs; and (2) Active Shutter

3D glasses with matching synchronization emitter or

DLP Link Active Shutter 3D glasses are required in

order to view 3D content.

Notes on Using 3D Video Settings

3D signals and 3D settings affect some TV functions.

Switch to a non-3D source to regain full TV operation.

If Source Format is set to Automatic or one of the

named 3D formats OR Source Format is set to Off and

the 3D video source is HDMI 1.4a compliant (picture

may appear as 2D), the following limitations apply:

• Picture adjustments are limited. To make picture

adjustments while watching normal 2D images from

the device, temporarily set Source Format to Off

to make the full range of adjustments accessible.

• The

FORMAT

key is disabled.

• The

INTERNET

key is disabled.

3D Video, continued

Press

EXIT

to close the menu.

If the image does not appear correct

(e.g., objects

appear to be moving in instead of out),

open the

Picture > 3D Mode menu and set Glasses L-R to

Reverse.

When finished watching 3D video:

• If you manually selected a source format in the

Picture > 3D menu, open the menu and select

Automatic or Off.

• If your 3D video device is HDMI1.4a compliant,

keep the setting on Automatic.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD-73838 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info