Bedienungsanleitung Mitsubishi WD-73838 (Seite 95 von 110) (Englisch)

475257

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

Appendices 95

For assistance call 1(800) 332-2119

Appendix E: Troubleshooting, continued

TV Power On/Off

Symptom Remarks

1. TV takes an excessively long time to power

on.

When powered on, the TV needs time to boot up, just as a com-

puter does.

2. You cannot program the TV to turn on auto-

matically (Timer function)

• The TV may be locked.

• The clock may not be set.

3. TV turned itself off and the light on the front

panel started to flash.

• Momentary power fluctuation can cause the TV to turn off

to prevent damage. Wait for the green light to stop flashing

and turn the TV on again.

• If the TV does not stay on, press the

POWER

button on the

control panel for ten seconds to perform System Reset. If

this happens frequently, obtain an AC line power condi-

tioner/surge protector.

• An unusual digital signal may have been received, triggering a

protection circuit. Wait for the light to stop flashing and turn TV

on.

4. TV will not power off. Press the

POWER

button on the control panel for ten seconds to

perform System Reset.

Picture

Symptom Remarks

1. Picture does not look like a high-definition

picture.

Compare the picture to the TV’s test picture (Picture > Picture+

> Test Picture) to check if the source signal is supplying a

lesser-quality image.

Not all signals are high-definition signals. To receive high-defini-

tion programming from your cable or satellite provider, you must

subscribe to the provider’s high-definition service. Some over-

the-air broadcasts are in high-deﬁnition and can be received with

a high-quality antenna suited to your location.

2. TV has sound but no picture. • Press

on the remote control. If the menu displays,

then there is a problem with the incoming signal.

• Check that all video inputs are plugged in firmly to the

correct input jacks.

• Press and hold the

POWER

button on the control panel for ten

seconds to perform System Reset.

3. Picture has become dimmer. • Thelampisnearingtheendofitslife.Orderanewlamp.

• Adjustpicturebrightnessandcontrasttomaximumlevels.

• ChangeLamp Energy from Standard to Bright.

4. You cannot view a picture when playing a

VHS tape.

Check your VCR’s owner’s guide for further troubleshooting.

5. VCR or DVD player’s on-screen menus jitter

up and down.

Stop playback. Possible cause: Many VCRs and DVD players

provide on-screen menus at only half-resolution that may

appear to jitter up and down.

6. When viewing a stopped VCR, white lines

are rolling on the screen.

• TurnoffvideomutefortheVCR.

• Beginplayingthetape.

• ChangetheVCRinputfromLine1totheVCRantennainput.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD-73838 Seite 95

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info