475266
13
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
1. Setup and Operation 13
For assistance call 1(800) 332-2119
3 D Video
Notice Concerning Format Compatibility
In order to display 3D images. Mitsubishi 3D Ready DLP
Home Cinema TVs require the use of a 3D source device
coupled with the Mitsubishi 3D adapter or other source
devices that support checkerboard display formats for
display of 3D games, 3D broadcasts from terrestrial/cable/
satellite and 3D Blu-Ray disc content. In all cases an emitter
and matching 3D active shutter glasses or DLP Link active
shutter glasses are required in order to view 3D content.
To display 3D gaming or 3D cinema content, your
Mitsubishi TV requires:
A compatible 3D source device outputting a 3D
signal in checkerboard format, 1080p, 60-Hz; lower
resolutions may be supported but will not fill the
screen.
Active-shutter 3D glasses, DLP link type or IR
emitter type with matching emitter.
Initial Setup
If your 3D glasses came with an emitter, connect
1.
the emitter to the
3D GLASSES EMITTER
jack. Place
the box in front of the TV where there is a clear path
to the glasses.
Notes:
If you require a Mitsubishi 3D adapter, refer
to the connection instructions provided with
the adapter. Please check our website,
www.mitsubishi-tv.com for updates to 3D
information and safety.
If your glasses are marked DLP Link, skip
this step; no emitter is required with DLP
Link technology.
1
2
3
HDMI
HDMI
Pb Pr
INPUT 2
INPUT 1
(480i / 480p / 720p / 1080i)
Y/ VIDEO
Pb Pr
Y/ VIDEO
3D
GLASSES
EMITTER
ANT
AUDIO
LR
DIGITAL
AUDIO
OUTPUT
DVI/PC
AUDIO
INPUT
3D
GLASSES
EMITTER
Connect the 3D video device to the TV’s HDMI
2.
input.
Watching 3D Video
Note: Active 3D glasses are required.
Connect your 3D video device to one of the TV’s
1.
HDMI inputs and power on the device.
Press
2.
INPUT
.
Highlight the 3D video input and press
3.
ENTER
to
switch to it.
Press
4.
MENU
and select the Setup > 3D Mode
menu.
Highlight
5.
3D Mode and press
ENTER
to select On.
The On setting will be memorized for the current
input when you exit this menu.
If using DLP Link-type glasses, highlight
6.
DLP Link
and press
ENTER
to select ON.
Use the Setup > 3D Mode menu to enable 3D video.
Press
7.
EXIT
to close the menu.
If the image does not appear correct
8.
(e.g., objects
appear to be moving in instead of out),
open the Setup
> 3D Mode menu and highlight 3D Mode Glasses
L-R. Press
ENTER
to change to Reverse.
To Watch Regular (non-3D) Video
The 3D Mode setting is memorized for each input.
When you want to watch non-3D video on the input
selected above, open the Setup > 3D Mode menu and
set 3D Mode to Off.
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mitsubishi WD-73C10 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info