Bedienungsanleitung Mitsubishi WD-82740 (Seite 21 von 56) (Englisch)

475249

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

2. TV Menus 21

For assistance call 1(800) 332-2119

S ound

Sound Au dio

Settings in this menu are saved for the current input only with the exception of Balance,

which applies to all inputs. Press to make changes and then press

to return to the

menu screen.

To make Audio adjustments while watching TV and without using the menu:

1. Press the

AUDIO

key.

2. Press to select an audio option.

3. Press to change the setting.

TV Speakers On Turns on the internal TV speakers.

Off

Turns off the internal TV speakers so you hear sound only from a connected A/V receiver.

Note: When you disconnect an A/V receiver, be sure to change the Sound setting

to TV to hear sound from the TV speakers.

Ce nter

840 Series. Makes the TV’s speaker array act as a center channel. See “Using the

TV Speakers as a Center Channel,” page 16 .

Notes:

• When

Center

is active, the subwoofer output is muted even if set to

• To de-activate the center channel, change

TV Speakers

to On or Off.

Center

[Center channel

level adjustment]

840 Series.

Adjusts the volume level of the TV speaker array when used as a

center channel.

Note: Set TV Speakers to Center to make this adjustment available.

Bass Controls volume of low-pitched sound from the TV speakers.

Sub woofer

[Subwoofer level

adjustment]

840 Series.

Adjusts the volume level of a connected subwoofer.

Note: Set Sound > Global > Subwoofer to On to make this adjustment available.

Treble Controls volume of high-pitched sound from the TV speakers.

Balance Controls audio balance between the right and left TV speakers

Sou nd Mode Stereo No special audio effects from the TV speakers

Surround Modifies audio from the TV speakers.

• For monaural (non-stereo) programs, creates a simulated stereo effect.

• For stereo programs, creates a simulated surround sound effect.

• The TV’s speaker array plays surround sound if available.

Music

840 Series.

Optimizes the TV’s speaker array for music listening.

Night

840 Series.

Focuses the TV’s speaker array to a single point to limit sound heard by

others outside the room. Press

ENTER

to adjust the focal point (Night Angle).

Level Sound On, Off Reduces differences in sound volume between programming segments, such as the

difference between regular broadcast programs and commercial segments.

Li sten To

(applies only

to analog

channels from

the

ANT

input)

Stereo The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The word

Stereo is displayed when you tune to a channel broadcasting in stereo.

Mono Reduces background noise. Use when receiving a weak stereo audio signal. All

audio is played as mono.

SAP

(Second Audio

Program)

Selects an additional monaural sound track not audible during normal TV viewing.

The SAP signal might be related to the program (such as a sound track in a foreign

language), or it might be unrelated (such as a weather report). If an SAP signal is

broadcast, the letters SAP are displayed when you tune to the channel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD-82740 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info