Bedienungsanleitung Mitsubishi WD-82842 (Seite 25 von 62) (Englisch)

475231

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

2. TV Menus 25

For assistance call 1(800) 332-2119

Picture 3D Mode

Source

Format

Off • Overrides the 3D processing of any HDMI 1.4a-compliant 3D signal and dis-

plays the signal in 2D instead.

• Allows access to some of the 2D picture adjustments that are hidden when the

TV’s 3D mode is set to Automatic.

Automatic • When the TV receives a 3D signal from an HDMI 1.4a-compliant device or from

VUDU 3D, forces the TV automatically into 3D mode and selects the correct

3D format.

• When the TV receives a normal 2D signal, makes the TV automatically exit 3D

mode.

• Not effective with checkerboard 3D. Manually select Checkerboard or

another mode when needed.

Side-by-Side

Top/bottom

Checkerboard

• 3D format choices for use with 3D signals that are not HDMI 1.4a compliant.

• When the TV receives a 3D signal that is not HDMI 1.4a compliant, you

must manually select a 3D format here based on the type of 3D signal being

received.

• Return the TV to Automatic or Off at the end of the non-compliant 3D

program.

• If an HDMI 1.4a compliant signal is received, the TV will automatically override

any manual 3D selection.

2D+ Depth When active, generates a simulated 3D image from an ordinary 2D signal.

Glasses

Emitter

Internal

Standard,

Reverse, Off

• For use with the TV’s internal emitters.

• Select the Off setting if you notice IR interfer-

ence with other devices.

Use the Standard or

Reverse setting to synchro-

nizes left/right images to

work with your 3D glasses.

Glasses

Emitter

External

Standard,

Reverse

For use with an external emitter connected to the

TV’s

3D GLASSES EMITTER

jack.

Depth • Available only when Source Format is set to 2D+ Depth.

• Highlight the icon and press

ENTER

to display the adjustment screen.

• Allows adjustment of the 3D effect from a flatter image to one with more depth.

DLP Link

Standard,

Reverse, Off

• For use with DLP Link.

• Select the Off setting if you are not using DLP

Link glasses.

Use the Standard or

Reverse setting to synchro-

nizes left/right images to

work with your 3D glasses.

Picture, continued

Notice Concerning Format Compatibility

The Mitsubishi TVs will support the mandatory HDMI

1.4a 3D signals intended for the United States. Spe-

cifically, the TVs will support the 3D signals known as

Frame Packing 1080p@24 Hz and 720p@60 Hz (primar-

ily from Blu-ray players and gaming consoles), Side-

by-Side(Half) 1080p@24/30/60 Hz, 1080i@60 Hz, and

720p@60 Hz, Top-and-Bottom 1080p@24/30/60 Hz

and 720p@60 Hz, and Checkerboard 1080p@60 Hz.

However, there may be some 3D sources that are not

compatible with the TVs. In all cases: (1) 3D sources

must connect to the TVs using the HDMI inputs or via

StreamTV™ Internet Media; and (2) Active Shutter 3D

glasses that match the TV’s internal synchronization

emitter, or Active Shutter 3D glasses with their own

external matching synchronization emitter connected to

the rear of the TV or DLP Link Active Shutter 3D glasses

are required in order to view 3D content.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD-82842 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info