Bedienungsanleitung Mitsubishi WD-92840 (Seite 2 von 56) (Englisch)

475247

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

For assistance call 1(800) 332-2119

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: To reduce the risk of fire or electric shock,

do not expose this apparatus to rain or moisture.

This apparatus shall not be exposed to dripping or

splashing and no objects filled with liquids, such as

vases, shall be placed on the apparatus.

Cet appareil ne doit pas être exposé à des gouttes ou

à des éclaboussures et aucun objet rempli d’un liquide,

comme un vase, ne doit être placé sur l’appareil.

WARNING: This product contains chemicals known

to the State of California to cause cancer and/or birth

defects or other reproductive harm.

TV WEIGHT: This TV is heavy. Exercise extreme care

when lifting or moving it. Lift or move the TV with a

minimum of two adults. To prevent damage to the TV,

avoid jarring or moving it while it is turned on. Always

power off your TV, unplug the power cord, and discon-

nect all cables before moving it.

St and Requirement

CAUTION: Use these Mitsubishi TV models only with

the Mitsubishi stand model shown here. Other stands

can result in instability and possibly cause injury.

TV Model Stand Model

WD-73740, WD-73840 MB-S73A

Mitsubishi does not design, manufacture or sell matching

bases for 82-inch and 92-inch model televisions. When

selecting a stand, base, or other furniture to support the

TV, please make sure it is designed with the appropriate

dimensions for stability and to support the TV’s weight plus

the weight of any additional equipment you plan to store.

MAINS DISCONNECTION: The mains plug is used

as the disconnect device. The mains plug shall remain

readily operable.

FCC Declaration of Conformity

Product: Projection Television Receiver

Models: WD-73740, WD-82740

WD-73840, WD-82840, WD-92840

WD-82CB1

Responsible

Party:

Mitsubishi Electric Visual Solutions

America, Inc.

9351 Jeronimo Road

Irvine, CA 92618-1904

Telephone: 1 (800) 332-2119

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired

operation.

Note: This equipment has been tested and found

to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a par-

ticular installation. If this equipment does cause harmful

interference to radio or television reception, which can

be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by

one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and

the receiver.

- Connect the equipment into an outlet on a circuit

different from that to which the receiver is con-

nected.

- Consult the dealer or an experienced radio/TV tech-

nician for help.

Changes or modifications not expressly approved

by Mitsubishi could cause harmful interference and

would void the user’s authority to operate this equip-

ment.

The lightning flash with arrowhead symbol within

an equilateral triangle is intended to alert the

user of the presence of uninsulated “danger-

ous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral tri-

angle is intended to alert the user to the presence

of important operating and maintenance (servic-

ing) instructions in the literature accompanying the product.

Custom cabinet installation must allow for proper

air circulation around the television.

Canadian Notice

For Model WD-82CB1

This Class B digital apparatus complies with Cana-

dian ICES-003.

Cet appareil numérique de la classe B est conforme

à la norme NMB-003 du Canada.

Note: Features and specifications described in this

owner’s guide are subject to change without notice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD-92840 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info