Bedienungsanleitung Mitsubishi WD-92840 (Seite 10 von 56) (Englisch)

475247

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

10 1. Additional TV Features

For assistance call 1(800) 332-2119

More On TV Inputs and Outputs, continued

2. USB

• Use for a wireless network adapter to receive

StreamTV internet content.

• The USB port can also serve as a standard USB

5-volt, 500-milliamp power output to power an

accessory device.

3. USB-P (Power Only)

840 Series. Standard USB 5-volt, 500-milliamp power

output you can use to supply power to an accessory

device. See page 14 .

4. LAN

Use the

LAN

Ethernet jack for streaming internet video

to the TV.

5. ANT ( Antenna)

Connect your main antenna or direct cable service

(without a cable box) to

ANT

. The

ANT

input can receive

digital and analog over-the-air channels from a VHF/

UHF antenna or non-scrambled digital/analog cable

source.

6. 3D GL ASSES EMITTER

Use this jack for the special synchronization emitter sup-

plied with some 3D glasses. The emitter sends out an

infrared signal that synchronizes your 3D glasses with the

screen display.

7. DVI/PC AUDIO INPUT

Connect a DVI device to one of the TV’s HDMI inputs

and use this jack to send analog audio to the TV.

8. L/R (INPUT 1 audio)

Analog stereo inputs for use in conjunction with adja-

cent composite or component video jacks.

9. Y Pb Pr (Component Video)

Analog video inputs able to accept high-definition video

from a high-definition source device. Use the adja-

cent

and

inputs if you wish to send audio to the TV

speakers.

10. Y (Composite Video)

Analog standard-definition video inputs. Use the adja-

cent

and

inputs if you wish to send audio to the TV

speakers.

11. DIGITAL AUDIO OUTPUT

This output sends Dolby Digital or PCM digital audio

to your digital A/V surround sound receiver. Incom-

ing analog audio is converted by the TV to PCM digital

audio. If you have a digital A/V receiver, this is the only

audio connection needed between the TV and your A/V

receiver.

12. AUDIO/SURROUND OUTPUT, L/R

840 Series. Provides analog audio output of the

current program. Use to:

• Send audio to an analog A/V surround sound

receiver or stereo system.

• Send a rear surround sound channel to an external

amplifier or self-powered speakers. See page 15 .

• Send audio to headphones. Set Sound > Global >

Analog Audio Out to Variable.

Digital audio from digital channels and HDMI devices is

converted to analog audio by the TV for output on these

jacks.

13. CENTER INPUT

840 Series. Connect your A/V receiver’s center

channel output to this input to have the TV speak-

ers complement your external sound system with

center-channel sound. Set Sound > Global > Center

Channel to On to enable this input. See “Using the TV

Speakers as a Center Channel,” page 16 .

14. SUBWOOFER OUTPUT

840 Series. Connect a powered subwoofer to this

input to complement effects from the TV’s speakers.

Set Sound > Global > Subwoofer to On to enable this

output (see “Adding a Subwoofer,” page 14 ).

15. EXTERNAL CONTROLLER INPUT

840 Series. Accepts control signals from an external

controller when set up by your professional installer.

The controller should send electronic versions of

remote control IR commands.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD-92840 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info