Bedienungsanleitung Mitsubishi wd2000 (Seite 24 von 40) (Englisch)

215831

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

EN-24

3. FEATURE menu

ITEM SETTING FUNCTION

ASPECT AUTO Select to change the aspect ratio automatically depending on the input signal.

(Select this option for normal use.)

16:9 This option allows you to select the display position of squeezed (or horizontally

compressed) images stored on DVD discs. By pressing the ENTER button, you

can select the display position among CENTER, UPPER, and LOWER.

REAL Select to project images in their original size as input. Not available when the

keystone adjustment is applied.

FULL Select to project images in full size (1280 x 768 pixels) irrespective of type of

input signal.

PASSWORD FUNCTION

Use to enable or cancel the password lock. See page 28 for details.

MENU POSITION

2 options Use to change the position of the menu.

CINEMA MODE

AUTO

The ﬁ lm mode will be automatically activated when a ﬁ lm source signal is input.

OFF The ﬁ lm mode will not be activated.

VIDEO SIGNAL 8

options

When AUTO is selected, the appropriate video format is automatically selected

depending on the input signal. If the image isn’t displayed correctly, select the

desired video format manually.

WXGA AUTO Use to detect WXGA signal automatically.

1280 x 768 etc. If WXGA signal isn’t displayed correctly when AUTO is selected, select the

appropriate display size depending on the type of input signal.

OFF When a signal other than WXGA is input, it may take abnormally long time to

display an image, or an image may not be displayed correctly. In such cases,

select OFF.

SET UP AUTO Select to change the SET UP mode automatically.

OFF Select to make black lighter.

3.75% / 7.5% Select to make black thicker.

• When 7.5% is chosen, the brightness is decreased by set-up cancel func-

tion for U.S. Choose OFF when the image is dark.

SCART INPUT ON / OFF Choose ON when connecting the projector with a device equipped with the

SCART terminal that can output RGB signal. SCART terminal is used mainly

in Europe. Choose OFF normally. (Available only for the input signal from the

COMPUTER/COMPONENT VIDEO IN-1 terminal.)

LANGUAGE 10 languages Use to select the language used in the menus.

RESET ALL OK Use to reset the settings of the menu (excluding PASSWORD FUNCTION and

LANGUAGE) to the factory setting values.

• When WXGA in the FEATURE menu is set to other than OFF, it takes a little while to display images of WXGA and

XGA60 signals.

•

Even if WXGA is set to AUTO, some images of WXGA signal may not be displayed correctly. See page 36 for details.

• When WXGA is set to other than AUTO and OFF, TRACKING isn’t adjusted automatically. When wide strips ap-

pear, adjust TRACKING in the SIGNAL menu. (See page 27.)

• When SCART INPUT is set to ON, nothing is output to the external monitor.

• When SCART INPUT is set to ON, normal computer signals aren’t projected.

• Use a SCART-BNC (or SCART-Mini D-SUB 15P) cable (option) when connecting this projector with an AV device

equipped with the SCART terminal.

• Some AV devices equipped with the SCART terminal aren’t compatible with this projector.

• It may take a little while to carry out RESET ALL in the FEATURE menu.

4. SIGNAL menu

ITEM SETTING FUNCTION

HORIZ. POSITION

0-999 Use to adjust the horizontal position of the projected image.

VERT. POSITION

0-999 Use to adjust the vertical position of the projected image.

FINE SYNC. 0-31 Use to eliminate ﬂ ickering or blur, if appears, viewing the projected image.

TRACKING 0-9999 Use to eliminate vertical wide stripes, if appears, viewing the projected image.

COMPUTER INPUT

AUTO The proper setting is automatically selected.

RGB Select this option if colors aren’t displayed correctly when a high-deﬁ nition video

device having R, G, and B outputs is connected.

/ YP

Select this option if colors aren’t displayed correctly when 480p (525p) signal is

input from a DVD player having Y, C

, and C

component video output terminals

or a high-deﬁ nition digital tuner having Y, P

, and P

component video output

terminals.

HOLD OFF / ON

Use to adjust the image when ﬂ agging occurs near the top of the screen.

USER OK

CLAMP POSITION

1-255 Use to correct solid white or solid black in the projected image.

CLAMP WIDTH 1-63 Use to correct solid black in the projected image.

VERT.SYNC AUTO / OFF Use to adjust the image when its motion doesn’t run smoothly. Select AUTO

for normal use.

OVER SCAN 100%-90% Use to adjust the display area of projected image.

LPF ON / OFF Use to select whether or not to enable the LPF.

SHUTTER (U) 0-38 Use to adjust the image when noise appears on the top part of the image.

SHUTTER (L) 0-38 Use to adjust the image when noise appears on the bottom part of the image.

SHUTTER (LS) 0-63 Use to adjust the image when noise appears on the left half of the image.

SHUTTER (RS) 0-63 Use to adjust the image when noise appears on the right half of the image.

Menu operation (continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi wd2000 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info