Bedienungsanleitung Mitsubishi WD390U-EST (Seite 18 von 69) (Englisch)

549869

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

EN-18

Basic operation (continued)

Setting the aspect ratio

You can change the aspect ratio of the input video

signal (or the ratio of width to height of the image).

Change the setting according to the type of the input

video signal.

With the remote control:

1. Press the ASPECT button.

• EverytimetheASPECTbuttonispressed,the

aspect mode changes from Normal to 16:9, to

Full, and back to Normal.

With the Picture menu:

(See page 21 for menu setting.)

1. Display the Picture menu.

2. Select Aspect Ratio by pressing the  or  button.

Aspect Ratio

Normal

3. Select your desired aspect ratio by pressing the 

or  button.

To cancel the menu:

4. Press the MENU button.

Important:

• Whena16:9imageiskeptdisplayedforalong

time before displaying 4:3 image, the afterimages

of the black bars may appear on the 4:3 image

screen. Consult your dealer in this case.

Caution:

• Thelampcan’tbelitagainforoneminuteafter

turned off for safety purpose. It will take another

one minute for the STATUS indicator to go out. If

you want to turn on the projector again, wait until

the indicator goes out, and then press the POWER

button.

• Theexhaustfansrotatefasterasthetemperature

around the projector rises.

• Whenthetemperaturearoundtheprojectorrises

high, the sign “Temperature!!” blinks red on the

screen. If the temperature stays high, the lamp will

go out automatically.

Important:

• Donotdisplayastillpictureforalongtime

because the afterimages may persist on the screen.

When connecting to a laptop computer:

When this projector is connected to a laptop

computer, there may be times when images may not

be projected. When it occurs, set the computer so that

it can output signals externally. The procedure varies

across computers in use. See the instruction manual

of your computer.

Watching 3D content

You can enjoy 3D content with this projector.

In order to watch 3D content, you need to have the

following items:

• Field-sequential3Dvideocontents

• DLP™Link™active3Dglasses

(Field-sequential: The system which displays

alternately the image for the left eye and the right eye.)

RLRRLRLL

RLRLRLRL

RLRRLRLL

RLRLRLRL

RLRRLRLL

RLRLRLRL

3D image Format

Page ﬂipping

(Field sequential)

Top & bottom CheckerboardSide by side

Not supported Not supportedNot supportedSupported

DLP™ Projector

The shutter timing of the 3D

glasses is controlled by

being synchronized with

switching of right and left

3D image which is detected

by the sensor of glasses.

DLP™ Link™ active

3D glasses

Sensor

Play the ﬁeld-sequential 3D video contents on a

computer or DVD player, and then, connect the cable

with the projector.

Go to the Picture menu (or press the 3D button on

the remote control) and set the 3D option to On.

(See page 22.)

Put on the 3D glasses to watch the contents.

If the contents are not projected correctly, go to the

Picture menu, and switch the 3D Sync Invert option to

On.

Important:

• Youcannotprojectthe3Dcontentfromtheinput

source LAN Display, USB Display, and PC Less

Presentation.

• Iftheviewingdistanceisnearerthanthe

recommended distance, it will cause physical

discomfort and eye fatigue.

• Watchthecontentsinfrontofthescreen,notatbig

angle. If you are viewing the screen at big angle,

you may not be able to view 3D contents correctly.

• Ifyouarenotviewing3Dcontentscorrectly,

check to see if the 3D glasses are powered on or

adequately charged. See the instruction manual of

the 3D glasses for more information.

• Therearepersonaldifferencesinviewingthe3D

images. For persons with myopia, hypermetropia,

astigmatism or left and right sights, please wear

glasses to correct them then wear the 3D glasses.

• Thepictureseemsmisplacedatthestartof

projecting the 3D images, however, this is not a

malfunction.

• Withthe3DoptionsettoOn,contentsdisplayed

on the projector appear darker. It is normal and

does not mean the projector is malfunctioning.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD390U-EST Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi WD390U-EST

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info