Bedienungsanleitung Mitsubishi WD390U-EST (Seite 62 von 69) (Englisch)

549869

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

EN-62

Troubleshooting (continued)

Images are not displayed correctly. (continued)

Problem Solution

Hue is not appropriate. • Checkthatthecablesconnectedtotheexternaldevicesarenotbroken.

Tint in projected

images is incorrect.

• CheckthatComputerInputintheSignalmenuiscorrectlyset.(Seepage24.)

• Checkthatthecableconnectedtotheexternaldeviceisn’tbroken.

Different color tint. •

When comparing images projected by two projectors, tints in the displayed images may be

different because of variation between their optical components. This is not a malfunction.

•

When comparing the image projected by this projector with those displayed on the

television or PC monitor, tints in the displayed images may be different because of

difference in the range of color reproducibility. This is not a malfunction.

Only the motion areas

in the images supplied

from the computer

aren’t displayed.

• Thisiscausedbythecomputerbeingused.Contactthemanufacturerofyour

computer.

Projected images are

obscured.

• Matchtheoutputresolutionofyourcomputerwiththeresolutionoftheprojector.

For the method to change the output resolution of the computer, contact the

manufacturer of your computer. (See page 68.)

• Someimagesandtextsappearobscuredduringthekeystoneadjustment.Insuch

cases, use the projector without applying the keystone adjustment. (See page 15.)

Noise appears around

the image.

• InsomeimagessuchasDVD,noisemayappeararoundtherecordedimage.Inthis

case, decrease the setting value of Overscan of the Signal menu. (See page 24.)

Projected images are

ﬂickering.

• AfterthePOWERbuttonorONbuttonontheremotehasbeenpressed,ortheLamp

Mode setting has changed, images may be ﬂickering until the lamp lights stably. This

is an expected behavior.

• Whenselectingtheinputsignal,AutoPosition,andImage,theprojectedimagemay

be ﬂickering temporarily. This is not a product malfunction.

Projector images are

twitching.

• Projectormaybevibrating.SetAutoKeystonetoOfforlowertheVOLUME button

of the Remote control.

Others

Problem Solution

The exhaust vents

emit warm air.

• Thisaircomesoutaftercoolingtheinsideoftheprojector.Youmayfeelhot,butthis

is not a malfunction.

No audio is output. • Checkthatthevolumeisn’tsettolow.

• ChecktheAudioInputsetting.

• WhentheexternaldeviceisconnectedwithanHDMIcable,settheaudiooutputof

the device to PCM output.

The menu can’t be

used.

• Themicrocomputersinsidetheprojectormaybewronglyoperatingbecauseofnoise.

 Press the POWER button to turn off the lamp and unplug the power cord from the

wall outlet. Wait about 10 minutes, plug the power cord in, and try again.

“Temperature!!” is

displayed.

• Thisindicationappearswhentheambienttemperatureriseshigh.Whentheambient

temperature stays high, the lamp goes out.

 Eliminate any causes of the rise in the ambient temperature.

• Thisindicationappearswhentheintakeorexhaustventsareblocked.Whentheyare

kept blocked, the lamp goes out.

 Remove the objects blocking the intake or exhaust vents.

The mark appears. •

This mark appears when ineffective operation is carried out. This isn’t a product malfunction.

The remote control

doesn’t function easily

or at all.

• Checkthatthebatteriesareloadedintheremotecontrolorthebatteriesarenot

weak. (See page 8.)

• Checkthattheremotecontrolsensorisn’texposedtodirectsunlightoruorescent

light. (See page 8.)

• Usetheremotecontrolwithinitsoperationrange.(Seepage8.)

• Usetheremotecontrolatleast10cmawayfromtheprojector.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD390U-EST Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi WD390U-EST

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info