Bedienungsanleitung Mitsubishi WD620U (Seite 32 von 44) (Englisch)

493633

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

EN-32

Advanced features

Displaying a user-defined image during startup or mut-

ing

You can display your desired image as the startup screen (or splash

screen). Using the menu, you can also use it as the background that is

displayed while the video is muted or no signal is input.

Important:

• You can't select IMAGE CAPTURE when PASSWORD FUNC-

TION in the FEATURE menu is set to SPLASH ID SCREEN to

activate the password lock.

• You can't select IMAGE CAPTURE when the component video

signal is input.

Procedure

1. Press the COMPUTER button to select the image input to the

COMPUTER/COMPONENT VIDEO IN terminal.

2. Display your desired image.

3. Display the INSTALLATION menu.

4. Select IMAGE CAPTURE by pressing the S or T button.

5. Press the ENTER button.

• When the capture starts, the captured image will be dis-

played.

• When you press ENTER button once, any button doesn't

function until the capture completes.

• When image resolution is lower than XGA (1024 x 768), the

image is captured by adjusting its resolution to XGA.

• When image resolution is higher than XGA (1024 x 768), the

image area of XGA is only captured.

Important:

• You can't change the new startup screen back to the original

screen. (Even when you select RESET ALL in the FEATURE

menu, the factory default screen is no longer effective.) When you

want to change the startup screen again, capture another image.

• The captured images will be deleted at the same time as pressing

the ENTER button. If you pressed ENTER button wrongly, try to

capture the same images again.

• The captured image is displayed from the next startup. If the cap-

tured image isn't displayed, check to see if SPLASH SCREEN in

the INSTALLATION menu is set to OFF. (See page 23.)

• To display the captured image while the video is muted, set AV

MUTE MODE in the INSTALLATION menu to IMAGE. (See page

23.)

• When BACK COLOR in the INSTALLATION menu is set to

IMAGE, the captured image is displayed while no signal is input.

• Some images can't be captured correctly because of their signal

type.

Freeze

To stop the motion in the image temporarily (or to dis-

play a still image):

Press the FREEZE button on the remote control.

• The image freezes temporarily.

To resume the motion in the image:

Press the FREEZE button on the remote control again.

Important:

• Do not keep displaying a still picture for an extended period of

time, as the afterimages may linger on the screen.

Password function

This projector provides the password function that is intended to pre-

vent wrong operations by children and set controlled access for speci-

fied users.

DISPLAY INPUT............When the projector is turned on, the star-

tup screen (or splash screen) appears and

stays on the screen until the password is

entered. When the password is entered,

the startup screen switches to the regular

operation screen.

MENU ACCESS ............ All the buttons except for the POWER but-

ton on the projector are disabled. (The

buttons on the remote control are

enabled.) You can use this mode to pre-

vent wrong operations by children and set

controlled access for specified users.

SPLASH ID SCREEN.... IMAGE CAPTURE and SPLASH

SCREEN in the menu become unselect-

able. SPLASH SCREEN is set to ON

automatically.

To enable the password function:

1. Display the FEATURE menu.

2. Press the S or T button to select PASSWORD FUNCTION.

3. Press the W or X button to change the mode among DISPLAY

INPUT , MENU ACCESS .

• When the password has already been set, the mode never

changes. Press the ENTER button to cancel the password

function and try again.

4. Press the ENTER button.

• The screen for setting the password function appears.

5. Press the ENTER button.

• The screen for entering a password appears.

6. Enter a 4 - 8 digit password using the S, T, W or X buttons on

the remote control as shown below.

(S=1, X=2, T=3, W=4)

7. Press the ENTER button.

• To cancel the procedure, press the MENU button.

8. Enter the password again for confirmation using the same steps.

9. Press the ENTER button.

• If the entered passwords are incorrect, an error message

appears.

• To cancel the procedure, press the MENU button.

LAMP MODE

OFF

AUTO KEYSTONE

OFF

IMAGE

REVERSE

WALL SCREEN

BEIGE

STANDBY MODE

STANDARD

AUDIO INPUT

AUTO

opt.

INSTALLATION

ADVANCED MENU

opt.

INSTALLATION

ADVANCED MENU

AUTO POWER

OFF

AUTO POWER

IMAGE CAPTURE

SPLASH

SCREEN

BACK COLOR

BLUE

AV MUTE MODE

BLACK

FEATURE

MENU ACCESS

LOCK

opt.

UNLOCK OK

PASSWORD

CONFIRM

O K : ENTER CANCEL : MENU

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD620U Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info