Bedienungsanleitung Mitsubishi WD62528 (Seite 66 von 110) (Englisch)

32987

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

Chapter 5. TV Menu Screen Operations

Record

Figure 14

The Record menu allows you to manually set up

recordings, view the record list, and set defaults for your

recording devices.

Figure 14. Record Menu

Recording Setup

Figure 15

Figure 15. Recording Setup screen

The recording Setup menu is where you tell the TV what,

where, and when to record. There are two ways to open

the Recording Setup menu:

• by selecting Record from the Record menu.

• by pressing REC on the remote control.

Your TV is able to start and stop recordings automatically

and send the signals from one external playback device

to another external recording device. It is also able to

convert digital channels and IEEE 1394 device signals to

analog signals that can be recorded on NetCommand-

compatible analog VHS and S-VHS VCRs connected to

the record audio and video outputs on the back of the TV.

You can schedule the recording to take place at a later

time and program the recording duration for a minimum

of 30 minutes and a maximum of 6 hours (in 30-minute

increments). The default is 1 hour.

When a digital recording is being made, the TV will direct

the signals to the recording device using the IEEE 1394

cable. In the case of an analog recording (as to a VCR)

the TV converts the digital signals to analog format and

sends the analog output to the VCR through the RECORD

OUTPUT jacks.

Record Menu

Recording Now

Can be used when viewing Antenna 1 or 2, an IEEE 1394

device, or a device connected to Input 1, 2, or 3.

To initiate recording now:

1. Press REC (record) on the TV remote or press ENTER

if the Record menu is displayed.

2. Review the destination device (VCR) and duration.

Change if necessary.

3. Press REC a second time to initiate recording.

Time-Delayed Recording

To initiate a time-delayed recording:

1. Press REC (record) on the TV remote or press ENTER

if the Record menu is displayed.

2. Press ADJUST or to select the channel, device

to record to, duration time, start time (press ENTER

after selecting hour to set minutes) and day.

3. Select Add and press ENTER to add the recording

to the record list. If your selection is successful, a

confirmation message will be displayed. If you pick

overlapping times, day(s), or destination devices, you

will see a message stating there is a conflict.

4. To exit, press HOME on the TV remote after all

recordings have been added.

During the recording, the TV can be powered Off.

To prevent recording of unwanted material while

recording to a VCR or A/V disc, press PAUSE to

temporarily stop recording. Press PAUSE again to

resume recording.

You cannot record from an analog channel or device or a

VHS or S-VHS VCR to a digital recording device such as

a DVCR or A/V Disc.

IMPORTANT

Recordings scheduled on this screen are

independent of recordings scheduled through

TV Guide On Screen®. Recordings scheduled

with TV Guide On Screen have priority if

there is a conflict between the two recording

schedules.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD62528 Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info