Bedienungsanleitung Mitsubishi WD720U (Seite 5 von 61) (Englisch)

493678

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

EN-5

Important safeguards (continued)

WARNING:

Unplug immediately if there is something wrong

with your projector.

Do not operate if smoke, strange noise or odor comes

out of your projector. It may cause ﬁre or electric

shock. In this case, unplug immediately and contact

your dealer.

Never remove the cabinet.

This projector contains high voltage circuitry. An

inadvertent contact may result in an electric shock.

Except as speciﬁcally explained in User Manual, do

not attempt to service this product by yourself. Please

contact your dealer when you want to ﬁx, adjust, or

inspect the projector.

Do not modify this equipment.

It can lead to ﬁre or electric shock.

Do not keep using the damaged projector.

If the projector is dropped and the cabinet is

damaged, unplug the projector and contact your

dealer for inspection. It may lead to ﬁre if you keep

using the damaged projector.

Be sure to unplug the power cord from the wall

outlet if the projector is fractured or deformed.

Otherwise, it may result in ﬁre or electric shock. Ask

your dealer for repair.

Do not face the projector lens to the sun.

It can lead to ﬁre.

Use correct voltage.

If you use incorrect voltage, it can lead to ﬁre.

Do not place the projector on uneven surface.

Place the projection on a leveled and stable surface only.

Do not look into the lens when it is operating.

It may hurt your eyes. Never let children look into the

lens when it is on.

Do not put any objects immediately in front of the

lens while the lamp is on.

The lens and the objects get hot and can cause ﬁre or

breakdown.

Do not unplug the power cord during operation.

It can lead to lamp breakage, ﬁre, electric shock or

other trouble.

Do not touch the exhaust vents and bottom plate.

Do not touch them or put other equipment close to

the exhaust vents because they become hot during

operation. The heated exhaust vents and bottom

plate may cause injury or damage to other equipment.

Also, do not put the projector on a desk that is easily

affected by heat.

Do not look into the exhaust vents when projector

is operating.

Heat, dust, etc. may blow out of them and hurt your eyes.

Do not block the intake and exhaust vents.

If they are blocked, heat may be generated inside the projector,

causing deterioration in the projector quality and ﬁre.

Do not use ﬂammable solvents (benzene, thinner,

etc.) and ﬂammable aerosols near the projector.

Flammable substances may ignite causing ﬁre or

breakdown because the temperature inside the

projector rises very high while the lamp is illuminating.

Do not use the projector with condensation on it.

It can lead to breakdown or other failure.

Place of installation

For safety’s sake, do not use the projector at any place

subjected to high temperature and high humidity.

Please maintain an operating temperature, humidity,

and altitude as speciﬁed below.

• Operatingtemperature:between+41°F(+5°C)and

+95°F(+35°C)

• Operatinghumidity:between30%and90%

• Neverputanyheat-producingdeviceunderthe

projector to prevent the projector from being

overheated.

• Donotinstalltheprojectorataplacethatis

unstable or subject to vibration.

• Donotinstalltheprojectornearanyequipmentthat

produces a strong magnetic ﬁeld. Also refrain from

installing the projector near any cable carrying a

large amount of current.

• Placetheprojectoronasolid,vibration-free

surface. Otherwise it may fall, causing serious injury

or damage.

• Donotstandtheprojectoronitsend.Itmayfall,

causing serious injury or damage.

• Slantingtheprojectormorethan±10°(rightand

left)or±15°(frontandrear)maycausetroubleor

explosion of the lamp.

• Donotplacetheprojectornearair-conditioning

unit, heater, or humidiﬁer to avoid hot or moist air

to the exhaust and ventilation hole of the projector.

•

Do not place the projector in the following places.

Otherwise, a short circuit, heat generation, or melting

of the power cord coating may occur, causing ﬁre,

electric shock, product failure, or deformation.

• Outdoorsornonair-conditionedplace

• Placewhereagassuchasahydrogensuldeis

generated (i.e. hot spring)

• Placewherethereistoomuchsaltsuchasnear

the coast

• Besuretousethisprojectoratanaltitudeofless

than1500meters.

Do not place a container containing water or other

liquid on the projector.

If water spills on or enters the projector, it may result in

ﬁre or electric shock.

Do not put any object that is heavy or larger than

the outer frame on the projector.

Otherwise, the object may fall losing its balance and

cause injury.

Do not subject the projector to strong shocks or

vibrations. Do not handle the projector roughly.

The projector may be damaged, resulting in ﬁre or

electric shock.

When removing the lamp from the ceiling-mounted

projector

Be sure to use the lamp replacement attachment

designed speciﬁcally for this projector when replacing

the lamp with a new one. Lamp fragments may fall

from the inside if the lamp were broken.

Mitsubishi WD720U Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi WD720U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info