Bedienungsanleitung Mitsubishi WD8700U (Seite 19 von 79) (Englisch)

549862

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

EN-19

Viewing computer images (continued)

1. Plug the attached power cord into the power cord inlet of

this projector. Fix the power cord to the projector with the

power cord holder.

2. Plug the other end of the power cord into a power outlet.

• ThepowercordsforuseintheU.S.andEuropeareincludedwiththisprojector.Usetheappropriateoneforyour

country.

• Thisprojectorusesthepowerplugof3-pingroundingtype.Donottakeawaythegroundingpinfromthepower

plug. If the power plug doesn’t ﬁt your wall outlet, ask an electrician to change the wall outlet.

• TheprovidedpowercordfortheU.S.isratedat120V.Neverconnectthiscordtoanyoutletorpowersupply

using other voltages or frequencies than rated. If you use a power supply using other voltage than rated, prepare

an appropriate power cord separately.

• Use 100-240 V AC 50/60 Hz to prevent ﬁre or electric shock.

• Do not place any objects on the power cord or do not place the projector near heat sources to prevent damage to

the power cord. If the power cord should be damaged, contact your dealer for replacement because it may cause

ﬁre or electric shock.

• Do not modify or alter the power cord. If the power cord is modiﬁed or altered, it may cause ﬁre or electric shock.

Caution:

• Plug in the power cord ﬁrmly. When unplugging, hold and pull the power plug, not the power cord.

• Do not plug in or out the power cord with your hand wet. It may cause electric shock.

• Whenyoumovetheprojector,turnoffthepower,unplugthepowercordfromthewalloutlet,andthenremovethe

connected cords. Otherwise, the power cord may be damaged, resulting in ﬁre or electric shock.

• Ifdustormetallicsubstanceisonoraroundthepinsofthepowerplug,unplugthepowercordandcleanitusing

a dry cloth. If you continue to use the projector without cleaning, it may result in ﬁre or electric shock. Clean the

power plug periodically at least once a year.

• Besuretounplugthepowercordfromthewalloutletiftheprojectorwillnotbeusedforalongperiodoftime.

Otherwise, it may cause ﬁre.

Power cord (example)

B. Plugging the power cord

• Inordertoensurethesafetyincaseoftroublewiththeprojector,useanelectricaloutlethavinganearthleakage

breaker to supply the power to the projector. If you do not have such outlet, ask your dealer to install it.

Earthing

terminal

Attaching the power cord holder:

To reduce the risk of accidental disconnection of the power

cord from the projector, attach the supplied power cord holder

to hold it.

Important:

• Once the power cord holder is attached to the projector, it

cannot be removed.

• Ifyouapplyanexcessiveforce,thepowercordholdermay

be damaged.

1. Insert the tip of the power cord holder into the slot with the

clamper facing toward the power cord.

2. Put the power cord in the clamper, and push the clamper in

the direction of the arrow to lock it.

3. Slide the clamper toward the plug.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD8700U Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi WD8700U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info