Bedienungsanleitung Mitsubishi WD8700U (Seite 48 von 79) (Englisch)

549862

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

EN-48

How to adjust the image supplied from the computer using the menu:

Carry out the following procedures according to the symptoms.

Wide strips appear. ……………………………………… Adjust TRACKING in the SIGNAL menu.

The projected image ﬂickers.

The projected image is blurred. ......................................Adjust FINE SYNC. in the SIGNAL menu.

The projected image is displaced horizontally. ..............Adjust HORIZ. POSITION in the SIGNAL menu. Every time the

 button is pressed, the image moves to the right. Every time

the  button is pressed, the image moves to the left.

The projected image is displaced vertically....................Adjust VERT. POSITION in the SIGNAL menu. Every time the

 button is pressed, the image moves down. Every time the

 button is pressed, the image moves up.

The top part of the image ﬂags. ..................................... Change the setting of HOLD in the SIGNAL menu. Select ON ,

press the ENTER button, and adjust BEGIN or END to minimize

the ﬂagging.

A solid black or solid white appears in the image. ........ Adjust CLAMP POSITION or CLAMP WIDTH in the SIGNAL

- USER menu.

The motion doesn’t run smoothly. ..................................Adjust VERT. SYNC. in the SIGNAL - USER menu. Select

AUTO for normal use.

Noise appears on the right or left half of the image. ......Adjust SHUTTER(LS) or SHUTTER(RS) in the SIGNAL - USER

menu.

Noise appears on the top or bottom part of the image.

.......

Adjust SHUTTER(U) or SHUTTER(L) in the SIGNAL - USER

menu.

1. Display the SIGNAL menu.

2. Press the  or  button to select an item to adjust.

3. Adjust the selected item by pressing the  or  button.

To cancel the menu:

4. Press the MENU button.

• DonotchangethesettingsoftheSIGNALmenuinnormaluse.

Simple method to adjust the image position

To adjust the horizontal position:

1. Align the left edge of the image with the left side of the screen by adjusting HORIZ. POSITION. Then, align the

right edge of the image with the right side of the screen by adjusting TRACKING.

2. Repeat step 1 above to complete the adjustment of the horizontal position.

To adjust the vertical position:

3. Align the upper edge of the image with the upper side of the screen by adjusting VERT. POSITION.

LPF (Progressive ﬁlter)

You can select whether or not to enable the LPF.

Vertical or horizontal streak noise may appear on the projected image, depending on the type of the DVD player or

game console you use. In such a case, you can reduce such streak noise by enabling the LPF. However, projected

images become softened slightly.

Adjusting projected images (continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD8700U Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi WD8700U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info