Bedienungsanleitung Mitsubishi WD8700U (Seite 59 von 79) (Englisch)

549862

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

EN-59

Split

You can split the screen in two and display a computer

image on the left screen and a video image on the

right screen.

Left screen Right screen

To use the split mode:

1. Press the SPLIT button on the remote control.

• Thescreenissplitintwoandtheleftandright

screens display the following images:

- Left screen: Image supplied to the last

selected input source,

COMPUTER1, COMPUTER2,

DVI, or HDMI

- Right screen: Image supplied to the last

selected input source, VIDEO

or S-VIDEO

• When you press the SPLIT button again, the

screen is displayed in the normal mode.

• Also,whenyoupresstheMENUbuttonor

change the input source, the screen is displayed

in the normal mode.

• Inthesplitmode,thepicturequalitysettings

of the input source in the normal mode to be

displayed on the left screen are reﬂected on the

entire screen.

• When no signal is input, a blue screen is

displayed.

• Whenyouinputaninterlacesignaltotheleft

screen, the displayed image may shake up and

down slightly, but this is not a malfunction.

• When you display 60-Hz and 50-Hz video

signals at the same time, motion images may

not be displayed properly. In this case, set VERT.

SYNC. of USER in the SIGNAL menu to OFF for

the left screen. (See page 40.)

• WhenBACKCOLORoftheINSTALLATION2

menu is set to IMAGE, you cannot use the split

mode unless a video signal is being input.

• Displayingthescreensplitintwomaytake

some time depending on the signal.

To change the input source of the left or right screen:

• To change the input source of the left screen, press

the  button on the remote control.

• To change the input source of the right screen,

press the  button on the remote control.

Advanced features (continued)

Magnifying the displayed image

By pressing the MAGNIFY button on the remote

control, you can magnify the image to view the details.

• WhileviewingtheimagefromtheCOMPUTER1,

COMPUTER2, DVI, or HDMI input source, you can

magnify the image.

Magniﬁed image

To use the MAGNIFY mode:

1. Press the MAGNIFY button on the remote control.

• You can select the area to be magniﬁed by

pressing the , ,  or  button on the

remote control.

• You can change the magniﬁcation of the

selected area by pressing the + or - button.

2. Press the MAGNIFY button again to exit the

MAGNIFY mode.

• The regular operation screen will appear.

Important:

• The MAGNIFY mode doesn’t function with some

input signals. For details, see page 75.

• In the MAGNIFY mode, you can’t display the MULTI-

SCREEN menu and the SIGNAL menu.

Freeze

To stop the motion in the image temporarily (or to

display a still image):

Press the FREEZE button on the remote control.

• The image will freeze temporarily.

To resume the motion in the image:

Press the FREEZE button on the remote control again.

Important:

• Donotdisplayastillpictureforalongtime

because the afterimages may persist on the screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WD8700U Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi WD8700U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info