Bedienungsanleitung Mitsubishi wl2650u (Seite 11 von 47) (Englisch)

216162

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

EN-11

Front projection, ceiling mounting

For ceiling mounting, you need the ceiling mount kit

designed for this projector. Ask a specialist for installa-

tion. For details, consult your dealer.

• The warranty on this projector does not cover any

damage caused by use of any non-recommended

ceiling mount kit or installation of the ceiling mount

kit in an improper location.

• When using the projector mounted on the ceiling,

set IMAGE REVERSE in the INSTALLATION menu to

MIRROR INVERT. See page 24.

• When the projector is mounted on the ceiling, im-

ages may appear darker than those projected in

the case of tabletop mounting. This isn’t a product

malfunction.

• Ask your installation specialist to provide a breaker.

When you do not use the projector, be sure to shut

down the main power by the breaker.

• Do not install the projector where the exhaust vents

are exposed to air emitted by an air conditioning.

Such installation may cause a breakdown.

• Do not install the projector near a ﬁ re alarm because

it emits hot air from its exhaust vents.

Rear projection

Ask a specialist for installation. For details, consult

your dealer.

• For rear projection, set IMAGE REVERSE in the

INSTALLATION menu to MIRROR. See page 24.

Caution:

• Placing the projector directly on a carpet impairs

ventilation by the fans, causing damage or failure.

Put a hard board under the projector to facilitate

ventilation.

• Place the projector at least 50 cm (or 20 inches)

away from the wall to prevent the air inlet grille and

the air outlet grilles that emit hot air from being

blocked.

• Do not use the projector in the following locations

and manners, which may cause ﬁ re or electric

shock.

• In a dusty or humid place.

• In a sideways position, or with the lens facing

down.

• Near a heater.

• In an oily, smoky, or damp place such as a kitchen.

• In direct sunlight.

• Where the temperature rises high, such as in a

closed car.

• Where the temperature is lower than +41ºF (or

+5ºC) or higher than +95ºF (or +35ºC ).

Important:

• We don’t recommend using the projector at an alti-

tude of 1500 meters or higher. Use at an altitude of

1500 meters or higher may affect the projector’s life.

Wall screen

This function is to reproduce natural color tone when

images are projected directly onto a wall. You can se-

lect from BEIGE, LIGHT BLUE, LIGHT GREEN, PINK,

BLACK BOARD and OFF depending on the wall to be

used.

1. Display the INSTALLATION menu. (See page 23 for

menu setting.)

2. Press the

button to select WALL SCREEN.

3. Press the

button to select the color closest

to that of the screen on which images are project-

ed.

• When projecting images on a screen or white

wall, select OFF.

• When OFF or BLACK BOARD is selected,

adjustment of the color density is unavailable.

4. Press the ENTER button.

5. Press the

button to adjust the color density.

• As an alternative method for selecting WALL

SCREEN, press the WALL SCREEN button on the

remote control.

INSTALLATION

opt.

WALL SCREEN

LAMP MODE

BEIGE

STANDARD

LIGHT BLUE 1

Setting up your projector (continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi wl2650u Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info