Bedienungsanleitung Mitsubishi wl2650u (Seite 18 von 47) (Englisch)

216162

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

EN-18

Connecting to video equipment having a DVI-D terminal

You can project high-quality images by connecting the DVI-D terminal of this projector to video equipment having a

DVI-D output terminal. In addition, this projector supports HDCP and is able to receive encrypted digital video data

that are output from DVD players.

• For connection to the DVI-D terminal, use a commercially available DVI cable.

• Select DVI as the input source.

• Only RGB signals are supported. Component video signals are not supported.

• HDCP (High-bandwidth Digital Content Protection), developed by Intel Corporation, is a method to encrypt digital

video data for the purpose of copy protection.

• When DVI is selected as the input source, settings of COLOR, TINT, FINE SYNC., TRACKING, HOLD, etc. are

unavailable.

• Use AUDIO IN-1 terminal for audio input.

When you connect this projector and a DVI-Digital device (such as a DVD player) via the DVI-D (HDCP)

terminal, black color may appear dark and deep, depending on the type of the connected device.

• This depends on the black level setting of the connected device. There are 2 kinds of methods to digitally transfer

image data, in which different black level settings are employed respectively. Therefore, the speciﬁ cations of the

signals output from DVD players differ, depending on the type of the digital data transfer method they use.

• Some DVD players are provided with a function to switch the methods to output DVI-digital signals. When your

DVD player is provided with such function, set it as follows.

EXPAND or ENHANCED

→

NORMAL

• See the users guide of your DVD player for details.

• When your digital device does not have such function, adjust the BRIGHTNESS to +16 and CONTRAST to -17

in the IMAGE menu of this projector, or adjust the black color by viewing the image.

B. Plugging in the power cord

Plug the power cord in the same way as in the case of “Viewing computer images.” (See page 14.)

Equipment having a

DVI-D terminal

To audio output

terminals

Audio cable (option)

To audio input

terminals

To DVI-D terminal

DVI cable (option)

COMPUTER/COMPONENT

VIDEO DVI-D (HDCP)

Viewing video images (continued)

CB(PB) Y CR(PR)

B G R

HD/CS VD

AUDIO IN-1/IN-2

Projector + DVD player or HDTV decoder

Some DVD players have an output connector for 3-line ﬁ tting (Y, CB, CR). When connecting such DVD player with this

projector, use the COMPUTER/COMPONENT VIDEO

IN-1/IN-2 terminal.

• The terminal’s names Y, PB, and PR are given as examples of when a HDTV decoder is connected.

• The terminal’s names vary depending on the connected devices.

• Use a Mini D-SUB 15-pin-BNC conversion cable for connection.

• Image may not be projected correctly with some DVD players.

• When connecting a HDTV decoder having RGB output terminals, set COMPUTER INPUT to RGB in the SIGNAL menu.

Mini D-SUB 15 pin-BNC

Conversion cable (option)

DVD player

or HDTV decoder

BNC-RCA connector (option)

No connection

COMPUTER/COMPONENT VIDEO

IN-1/IN-2

Audio cable (option)

To audio output terminals

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi wl2650u Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info