Bedienungsanleitung Mitsubishi wl2650u (Seite 21 von 47) (Englisch)

216162

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

EN-21

Setting the aspect ratio

You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the

setting according to the type of the input video signal.

How to change the settings:

With the remote control:

1. Press the ASPECT button.

• Every time the ASPECT button is pressed, the aspect mode changes from AUTO to 16:9, to REAL, to FULL,

and back to AUTO.

With the FEATURE menu:

(See page 23 for menu setting.)

1. Display the FEATURE menu.

2. Select ASPECT by pressing the

button.

3. Select your desired aspect ratio by pressing the

button.

When 16:9 is selected.

4. Press the ENTER button.

5. Select your desired position (CENTER, UPPER or LOWER) by pressing the

button.

To cancel the menu:

6. Press the MENU button.

Important:

• When a 16:9 image is kept displayed for a long time before displaying FULL image, the afterimages of the black

bars may appear on the FULL image screen. (See page 42.)

When projected images are distorted to a trapezoid:

To correct vertical and horizontal keystone distortion, press the KEYSTONE button on the projector or the remote

control to display KEYSTONE, and adjust the image by pressing the

, or

button (or VOLUME + or - button

on the remote control).

In the following cases (for front projection):

FEATURE

AUTO

opt.

ASPECT

Press the

button.

Press the

button.

Press the

(or -)

button.

Press the

(or +)

button.

Important:

• You can correct the vertical and horizontal keystones at the same time. However, their adjustment ranges are

limited in such correction.

• When the keystone adjustment is carried out, the adjustment value is indicated. Note that this value doesn’t mean

a projection angle.

• The allowable range of the adjustment value in the keystone adjustment varies depending on the installation

conditions.

• When the keystone adjustment takes effect, the resolution decreases. In addition, stripes may appear or straight

lines may bend in images with complicated patterns. They are not due to product malfunctions.

• Noise may appear on the screen during the keystone adjustment because of the type of the video signal being

projected and the setting values of the keystone adjustment. In such cases, set the keystone adjustment values in

the range where the image is displayed without noise.

• When the keystone adjustment is carried out, the image may not be displayed correctly because of the type of

input signal.

• When horizontal and vertical keystone adjustments are performed in combination, the adjustable range becomes

narrower than in the case when they are performed separately.

• When the keystone adjustment is performed, the displayed image may be distorted.

• Depending on the installation conditions of the projector and the screen, a perfect rectangular image and the

proper aspect ratio may not be obtained.

• In the keystone adjustment with the option lens, the proper aspect ratio may not be obtained.

Viewing video images (continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi wl2650u Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info